|
Post by kings6 on Apr 18, 2024 13:49:35 GMT -5
Not so sure about that Don. Old flat tops tend to go under the knife here so I have to show restraint until I decide its fate.
|
|
|
Post by kings6 on Apr 18, 2024 13:28:07 GMT -5
The first fluted bisley 41 I found traveled to Eastern TN and became a 5 1/2” perfected bisley with French walnut grips by Mr. Fishpaw. It later grew a longer cylinder before I sent it to a new home. I have a spare untouched 41 fluted bisley tucked away just in case I get the bug again.
|
|
|
Post by kings6 on Apr 18, 2024 13:23:49 GMT -5
Congratulations Bushog. Rem and Ashly move back to NM next month and he told me yesterday he drew rifle elk, archery antelope and archery Barbary sheep! May be in NM this fall tagging along.
|
|
|
Post by kings6 on Apr 17, 2024 14:33:39 GMT -5
You know where it will be Don!
|
|
|
Post by kings6 on Apr 17, 2024 13:20:15 GMT -5
Typically they tend to bring a little more in my experience.
|
|
|
Post by kings6 on Apr 17, 2024 8:41:07 GMT -5
Dealing with docs and WC in job injuries just adds mental pain to the physical pain!
Hope the meetings lets things move forward for you.
|
|
|
Post by kings6 on Apr 16, 2024 21:47:50 GMT -5
Someone else's base pin but that is ok, I'm sure I have one in the box, If not I know a couple guys that will have one. Pretty sure it is a MR3-DB and not a Qualite or S&G but we will see once it arrives.
|
|
|
Post by kings6 on Apr 16, 2024 21:04:41 GMT -5
I did! Thank you!
|
|
|
Post by kings6 on Apr 16, 2024 18:52:47 GMT -5
Thank you Bob, we will see what happens. Good deal guys so feel free to jump in.
Robb
|
|
|
Post by kings6 on Apr 15, 2024 23:52:22 GMT -5
When I was at Alan’s a couple weeks ago we made a set of one piece grips for my USFA he is working on. Alan spent a disportionate amount of time fitting the inner spacer to the inside of the backstrap. I mean apply Prussian blue, fit, see high spots and work that spot down then do it all over again. He even made sure the grain pattern of the spacer matched both grips just because that’s the way he does things.
|
|
|
Post by kings6 on Apr 15, 2024 22:59:14 GMT -5
If the main spring strut support was reconfigured then a two piece grip frame for the Ruger coil spring strut would work. That is what the Power Custom Two piece Colt style grip frame for Rugers works. I have used it on several custom Fugers with one piece grips.
|
|
|
Post by kings6 on Apr 15, 2024 17:34:33 GMT -5
Very nice job Sir!
|
|
|
Post by kings6 on Apr 15, 2024 14:09:57 GMT -5
They were long hex head screws to install in the grip frame when you were working on the gun so you could bolt the frame off and on with out buggering up the factory screws. I had a set but gave them away and need to find another set.
|
|
|
Post by kings6 on Apr 13, 2024 10:46:14 GMT -5
Here is one side of the block I found yesterday when at the hardwood store.
|
|
|
Post by kings6 on Apr 13, 2024 10:23:49 GMT -5
The folks that live up the road a mile have a standard poodle that is a hunting fool! No hunting training but a squirrel or bird on the ground is not safe with her around.
|
|