|
|
Post by rjm52 on Dec 11, 2020 9:03:43 GMT -5
...continues....
Have never seen such prices for Marlin lever guns before especially the short barreled guns....way way over a grand.
Guess people are figuring that once Ruger starts production things won't be as they were....
Bob
|
|
|
|
Post by taffin on Dec 11, 2020 9:23:56 GMT -5
THEY WILL BE BETTER
|
|
StanleyWhite
.30 Stingray
Former Marine and still working for the man.
Posts: 147
|
Post by StanleyWhite on Dec 11, 2020 9:31:15 GMT -5
I am extremely excited to see what the Ruger / Marlin team produces.
Until then, I'll stick with my JMs.
-Stan
|
|
|
|
Post by needsmostuff on Dec 11, 2020 10:27:38 GMT -5
I don't have to worry about current prices,,,,, cuz I'm not seeing ANY of them for sale .
Marlin or Remlin .
|
|
bamagreg
.327 Meteor
Woodstock, GA
Posts: 851
|
Post by bamagreg on Dec 11, 2020 13:40:54 GMT -5
I don't have to worry about current prices,,,,, cuz I'm not seeing ANY of them for sale . Marlin or Remlin . There are a lot of them for sale around me. For some reason anything lever action has really spiked in price especially the 45-70's. Winchester 94's in 30-30 for $700! I don't think so. I think I sold my 45-70 Guide Gun and my 44 mag Marlins 10 years ago for around $400-450 each. When I was a kid I couldn't wait to get rid of my Marlin 336 and get a "Real" rifle. I stepped up to a Rem. 700 in 25-06 and never really had a big desire for lever guns since then even though I have had a few. |
|
|
|
Post by x101airborne on Dec 11, 2020 15:17:04 GMT -5
I have a Remlin 30-30 that I carry around because I hate that rifle. I figure I can use it for nasty farm jobs I wont put my other good Marlins through. Factory sight settings had it hitting 18 inches high and 18 inches left at 50 yards. Couldn't drift the rear sight over enough to get centered without the rear sight falling out of its slot. When it did stay in the slot, the rifle shot 5 1/2 inches high at 50 yards with the elevator completely removed. That would be great if I wanted a rifle zeroed at 300 yards. I put a red dot on it and got it sorta sighted in. 4 inch groups at 100 yards with even handloads. I just wont sell a crap rifle to someone else without telling them.
|
|
|
|
Post by silcott on Dec 11, 2020 18:08:44 GMT -5
Me and my father were just talking about how Marlins have jumped in price.We both agreed that we probably won't buy another lever gun until we see what Ruger is going to release. Ruger posted that we should start seeing their lever guns on the shelves in the second half of 2021.
Justin
|
|
|
|
Post by x101airborne on Dec 11, 2020 18:49:34 GMT -5
Justin, I pray to God Ruger is correct on their dates.
I want a 454 Casull or a 480 Ruger or a 500 Smith b.a.d.l.y.! LOL!
|
|
450ak
.30 Stingray
Posts: 458
|
Post by 450ak on Dec 11, 2020 19:10:07 GMT -5
Uhmmm you most emphatically do not want a marlin in 500 s&w. When I tested a marlin I to rebarreled to 500 it failed very quickly. I kept shooting it as a single shot until the locking bolt was so deformed it would not function. That took 64 rounds by the way. It also would not feed from the magazine.
|
|
|
|
Post by x101airborne on Dec 11, 2020 22:21:13 GMT -5
Uhmmm you most emphatically do not want a marlin in 500 s&w. When I tested a marlin I to rebarreled to 500 it failed very quickly. I kept shooting it as a single shot until the locking bolt was so deformed it would not function. That took 64 rounds by the way. It also would not feed from the magazine. Well, I shall learn from the experienced. It was just a dream really. I have a H&R 500 Smith and Wesson single shot rifle. If you want to feel a little "thump", well... its got it. |
|
|
|
Post by silcott on Dec 12, 2020 13:02:14 GMT -5
If Ruger decides to build a 50cal. lever action, I'm pretty confident it will be plenty strong.
Justin
|
|
|
|
Post by flyingzebra on Dec 12, 2020 13:13:57 GMT -5
Small frame Marlin 500 lever guns are unicorns.  |
|
|
|
Post by flyingzebra on Dec 12, 2020 13:20:36 GMT -5
They virtually don't exist.  |
|
|
|
Post by flyingzebra on Dec 12, 2020 13:22:01 GMT -5
I don't know anyone who would make one.  |
|
|
|
Post by flyingzebra on Dec 12, 2020 13:24:06 GMT -5
And if you found someone who could, the wait would be unbearable and the price would be unspeakable.  |
|
