|
Post by boolitdesigner on May 4, 2017 21:49:48 GMT -5
|
|
|
Post by sixshot on May 6, 2017 1:06:23 GMT -5
I have that mould & like it a lot. I use it in my 9mm S&W M&P & also in 38 special, works great on Ground Squirrels & one Badger All my bullets have been powder coated. My bullets are sized .357" in both guns.
Dick
|
|
|
Post by AxeHandle on May 7, 2017 8:29:08 GMT -5
There was a point in my life in the 80s where I wanted a custom 9mm bore revolver built on a S&W. Out in the shop there is a 15 inch Shilen barrel marked .355 on the end. My plan was to have L frame NRA Action guns built on a pair of S&W 681s. Don't remember the twist. Life changed, and I traded the 681s off. These days the barrel makes a dang good bug killer. Bet somebody needs that barrel...
|
|
|
Post by 2 Dogs on May 11, 2017 13:02:15 GMT -5
Ok, I find myself working on so many different things it is hard to complete any one thing sometimes. I have picked up 2 Sig P320s. A full size Tac Ops model that comes with 4 21 round magazines (talk about being able to rain hail) as well as a Compact with standard 3 dot sights. I have already sent the Compact slide to One Source Tactical for the Trijicon RMR cut and black on black suppressor height sights. The red dot sight is a must for me and the Trijicon unit is far more durable than the as yet unproven Sig Romeo unit. If you decide to follow suit, be advised that the factory Sig night sights will not leave enough slide real estate to install a RMR. Better to save that money.
|
|
|
Post by 2 Dogs on May 11, 2017 13:35:58 GMT -5
Oh, I forgot to mention, all my Glock kit, and there is a lot of magazines, high end quality kydex, and just stuff is going down the road. My Kahr 9mm kit will be leaving too. PM me if interested.
|
|
|
Post by AxeHandle on May 12, 2017 6:31:59 GMT -5
Glock stuff? I'm in! While I still see a Glock as a nasty thing with no soul, for me they are the right tool for the job. You don't take a carving knife to the woods to cut firewood. What really tips the scale toward Glock for me over all the other plastic fantastics is that as a non military, non LE civilian GSSF member you can attend Glock training to be trained on how to maintain the little beasts. After training Glock will sell you parts too.
PM Coming!!!
|
|
|
Post by 2 Dogs on May 26, 2017 12:58:42 GMT -5
|
|
groo
.327 Meteor
I yet live!!!!
Posts: 855
|
Post by groo on May 27, 2017 11:10:52 GMT -5
Groo here I know we like the Miha molds in all flavors, BUT, 9mm is one of the few I would NOT cast for. [Except for some "Special purpose" low volume loads] Plated and commercial bullets ar so inexpensive that I save my alloy for larger or special loads.
|
|
|
Post by 2 Dogs on Jul 26, 2017 19:11:43 GMT -5
Ok, just a brief update on this 9mm project. Suarez International replaced thier machine tool driver with an older more mature an careful type I'm told. So my original P320 slide is still out for the RMR cut. Some weeks back, I went ahead and purchased another (my 3rd) P320, this one a Compact RX. I have been carrying it daily (testing a new Barranti AIWB design ssshhhh), and lo and behold the Romeo 1 sight has been trouble free.
Additionally, this unit is very soft shooting, positive handling, and completely insensitive to imperfect ammunition. More, it is very accurate.
I like it.
|
|
|
Post by magman on Jul 26, 2017 19:23:56 GMT -5
I looked at the 320s last weekend. Having a hard time buying a 9 when I have 1/2 dozen acps.
|
|
|
Post by 2 Dogs on Jul 27, 2017 22:53:37 GMT -5
Ok, I mention a new super secret prototype Barranti (who the HELL is that guy) holster and nobody bites???
|
|
|
Post by dougader on Jul 28, 2017 13:08:56 GMT -5
Ok, I mention a new super secret prototype Barranti (who the HELL is that guy) holster and nobody bites??? Spill the beans, Fermin!
|
|
|
Post by 2 Dogs on Jul 28, 2017 13:15:44 GMT -5
Soon
|
|
|
Post by Markbo on Jul 28, 2017 13:34:37 GMT -5
That's why nobody bites.
|
|
|
Post by dougader on Jul 28, 2017 23:33:27 GMT -5
|
|