|
|
Post by trueat1stlight on Mar 6, 2014 21:10:19 GMT -5
I thought this would be an entertaining way to list loads and share with everyone what we've been up to at the bench!
-50 rounds of .44 Mag:
300 grain Cast Performance WFN GC over 21.5 grains of H110
-50 rounds of .44 Mag:
300 grain Cast Performance WFN GC over 18 grains of Enforcer
-10 rounds of .375 H&H Mag:
250 grain TTSX over 78.5 (max!) grains of RL15
-10 rounds of .375 H&H Mag:
250 grain TTSX over 60 grains of 8208XBR
-10 rounds of .375 H&H Mag:
260 grain Accubond over 80 grains of IMR 4831
-10 rounds of .375 H&H Mag:
260 grain Accubond over 80 grains of RL 19
-10 rounds of .375 H&H Mag:
250 grain TTSX over 70 grains of TAC
Doing some load development for the .375 and putting together a stash of heavy cast loads for a few wheel guns.
-John
|
|
|
|
Post by zeus on Mar 6, 2014 21:24:22 GMT -5
I found that the 270 TSX and 76 grains of RL15 is a one hole load in my gun. Second load I tried. Does about 2715 in my gun.
I loaded. 50 rounds of fireform loads for a 30 Herrett this evening down at the bench
|
|
|
|
Post by bushog on Mar 6, 2014 22:26:05 GMT -5
My Gun!!!!!
|
|
|
|
Post by zeus on Mar 6, 2014 22:44:15 GMT -5
|
|
|
|
Post by Thunderjet on Mar 6, 2014 22:51:15 GMT -5
What did I load today? 300 rounds of 45 ACP with 4 grains of N310 and 230 grain Remington slugs.
|
|
|
|
Post by seancass on Mar 6, 2014 23:29:21 GMT -5
I was just thinking about doing this thread! Great post! I too reloaded and rapidly unloaded just my guns today.
|
|
|
|
Post by AxeHandle on Mar 6, 2014 23:53:22 GMT -5
Ran a lube soaked Q tip down the neck of 100 22 Hornet caases. Ran a .24 expander ball down the throat of those cases. Follow that by running a .25 expander down 50 ot the 100 cases. Seated CCI small primers in all 100 cases. Hope to drop some H110 and seat some bullets soon...
|
|
|
|
Post by schmidty on Mar 7, 2014 8:59:37 GMT -5
Loaded a few .500 S&W using my 390gr from Matt's Bullets. Guesstimated a powder charge of SR-4759 - about 3/4's of case volume filled - which should be safe.
|
|
|
|
Post by contender on Mar 7, 2014 11:38:01 GMT -5
Work & a NRA event kept me off the loading bench today.
|
|
tgc
.30 Stingray
Posts: 142 
|
Post by tgc on Mar 7, 2014 17:07:20 GMT -5
I've been working on this a few days.
I have 155 grain GC & 193 grain no GC cast bullets for my 30-30.
What I wanted was to have tight groups with each bullet BUT have the same POI @ 100yds so no scope adjustment was needed when switching between loads. Took quite a few load adjustments. I use the 30-30 for hunting, not killing paper. I got what I wanted and finally today my supply of bullets were loaded.
Now get this, I really gave my gun a good cleaning. You know how a gun won't shoot good after a good barrel cleaning? Now I have to re-break in the barrel. It was really stack'in 'em in there. I will think a while before I clean a barrel that good again.
|
|
|
|
Post by tullymars on Mar 7, 2014 18:14:57 GMT -5
400 .357 158gr jhp for my anniversary flattop that I have neglected for too long.
|
|
|
|
Post by trueat1stlight on Mar 7, 2014 21:11:14 GMT -5
Thanks guys for embracing the thread- fun to see what you're working on. Stay tuned for some .458 Lott monster CEB Safari raptors I am hoping to wrap up loading tonight.
-John
|
|
princeout
.375 Atomic
Enter your message here...
Posts: 2,015
|
Post by princeout on Mar 7, 2014 22:29:33 GMT -5
Loaded up some 450 gr Mt Baldy Keith style in .500 LInebaugh then went and shot them! Post on Ruger ForumTim |
|
|
|
Post by unclezeb on Mar 7, 2014 23:21:42 GMT -5
Acquired 8lbs of H110 to load magnum's for the next couple months
Formed some 300aas from LC5.56 brass.
|
|
|
|
Post by AxeHandle on Mar 8, 2014 7:16:04 GMT -5
Hope to get to the bench today to put together some fire form loads for my 240 and 255 Banshee revolvers. H110 and AA #9 look to be the primary powders from the loading manual. Gary says to back down 1 grain for the fire form loads. These are very efficient little cartridges. Maximum loads of 10-12 grains push 65 and 75 grain bullets over 2000 FPS. At 7,000 grains grains per pound looks like I'll expect to load in the neighborhood of 700 cartridges per pound.
|
|
