|
Post by bobwright on Jan 17, 2024 17:16:27 GMT -5
As...............as to Colt and Ruger, may I present this just for bunkum: Bob Wright P.S. I KNOW the correct spelling is Buncombe.
|
|
|
Post by bobwright on Jan 17, 2024 17:10:58 GMT -5
as to the introduction of the Blackhawk, when I saw the first advertising photos they were of a 4 5/8" Flat Top Blackhawk and I thought that was the handsomest revolver profile I'd ever seen. But funds were short at the time and an $89.95 price tag was 'way out of reach. In May of 1958 I was better off financially, and a young soldier at Camp Roberts, California. So took a pass and went into Paso Robles and saw one there so bought it on the spot. Had to get it registered with the Provost Marshal and my company commander's permission to keep it in the company arms room. The latter was of no consequence to me, I was in charge of the arms foom! That in 1958. The same Ruger today: The grips are mesquite from Cary Chapman, all aluminum parts replaced width steel. I think it has over 15,000 rounds fired through it. Bob Wright
|
|
|
Post by bobwright on Jan 17, 2024 13:49:36 GMT -5
Here are my Colt New Frontiers in 45 Colt. The 7 1/2" was made in 2018 The 5 1/2" was made in 2017 The 4 3/4" was made in 2018 I had called Colt to inquire about them making a 44 Special out of the Custom Shop and they told me there are no more frames. The two short barreled guns I picked up recently and haven't had a chance to shoot. The 7 1/2" gun shoots great. Beautiful set of stags. Goes just perfectly with the New Frontier! Bob Wright
|
|
|
single action for defensive carry,,,,,,,,,,,,,,
Jan 16, 2024 14:52:12 GMT -5
rexster, birdshead2021, and 2 more like this
Post by bobwright on Jan 16, 2024 14:52:12 GMT -5
One point detractors overlook is that drawing and cocking the Single Action revolver is not two separate actions but rathedr one. The hammer is cocked as soon as the gun clears leather and fired as soon as the gun comes level.
And, losing your gun in a justified shooting? I know of only about three cases, all here in Memphis, Tennessee, and in no case did the intended victim have to surrender his gun.
Bob Wright
|
|
|
Post by bobwright on Jan 16, 2024 14:44:30 GMT -5
I can't say I'm 100% in agreement with you, as I do like the Blackhawks ans Super Blackhawks. But as to the New Frontier, I do likethem. I've always sort of thought I'd like to see Colt make a copy of the Super Blackhawk. Bob Wright
|
|
|
single action for defensive carry,,,,,,,,,,,,,,
Jan 12, 2024 9:55:38 GMT -5
rexster, jonjon, and 3 more like this
Post by bobwright on Jan 12, 2024 9:55:38 GMT -5
I have been carrying a Ruger Blackhawk since about 2010 or so, and that daily. Here is my Sunday attire, sans sport coat: I have been experimenting with daily carry rigs for awhile. The one here is Doc Barranti's No. 1 Schuck, with the added band, or cuff, from his Ethan Edwards Model. This holster was made to be worn on a 2 1/2" cartridge belt, but I added a strip of leather to wear on my 1 1/2" pants belt. These are some of my trial holsters for carrying a Ruger Single action. On the left is Barranti's Hipshots Model, right is made for me by American Custom Gunleather made from my description via email: Bob Wright P.S. I see I have already responded to this post. I apologize for the extra [post.
|
|
|
Post by bobwright on Jan 9, 2024 22:22:55 GMT -5
Dear Ruger, I'd like a Blackhawk Flat Top, blued, 7 1/2" and 4 5/8" barrels, with genuine case hardened finish on the frame, and all steel grip frame and ejector housing. All steel rear sight with a flat face that does not overhang the hammer spur. And, for cryin' out loud, don't incorporate that beavertail hammer spur. And real wood grips, prefer walnut. Oh, wait, I've got a Colt New Frontier. Bob Wright
|
|
|
Post by bobwright on Jan 4, 2024 14:33:22 GMT -5
Craig,
That is the most beautiful display of handsome revolvers I've ever seen. Thank you for posting those.
Bob Wright
|
|
|
Post by bobwright on Dec 21, 2023 11:57:19 GMT -5
About a hundred years ago; well, back in the last century, anyway; I tried muy hand a holster making. the first few were really duds and I discarded them. Actually, my wife sold them at a yard sale. I did make one I still have: And, some frty years later: And, some very early tries, gone by way of yard sale: The effort was interesting, and I learned to leave holster making to the professionals! Bob Wright
|
|
|
Post by bobwright on Dec 21, 2023 11:45:51 GMT -5
Ha! The veruy first holst I made was an original creation for a Super Blackhawk. At the time I knew nothing about pattern making, so the Super Blackhawk holster ended up being a pderfect fit for a Single Six! Bob Wright
|
|
|
Post by bobwright on Dec 20, 2023 22:25:55 GMT -5
As I noted, those rigs were for urban carry. If I am in a more rugged envoirment/endeavor, I too, use a retaining strap. This old holster is one I made some forty years ago or so: Another attempt at holster making from days of yore: Bob Wright
|
|
|
Post by bobwright on Dec 19, 2023 21:19:21 GMT -5
I carry a Ruger Single Action Blackhawk as my daily sidearm. Since I'm in an urban envoirment, I prefer no retention device. I am pretty well practiced that when I grasp the gun but, my thumb is in contact with the hammer spur. Its my thinking that thongs, straps, shirts or jackets that require lifting with the off hand, may likely get you killed. At my age, I do no strenous flips, rolls or hanging upside down. This my preferred rigs: Bob Wright
|
|
|
Post by bobwright on Dec 15, 2023 10:23:59 GMT -5
I was also wondering, for the sake of wondering, if there is any way to use a super Blackhawk hammer with a Bisley trigger? I know there would be an excessive hole in the grip frame, but would it work? Umm, are you saying fit a Bisley trigger to a Super Blackhawk? If so, that is possible. Someone once made this drawing with dimensions: But the Super Blackhawk hammer on a Bisley....why? Bob Wright
|
|
|
Post by bobwright on Dec 13, 2023 9:21:56 GMT -5
The reason I asked is I was wondering if these short .45s would work in that revolver. I made these rounds out of pold .45 Colt cases that had neck splits. They work fine in my .45 Rugers with the ACP cyinder in place. As to the why of such cases and ACP cylinder, just because. And, its sort of "old timey" in use. Bob Wright
|
|
|
Post by bobwright on Dec 12, 2023 21:49:23 GMT -5
Out of curiosity, is there enough headspace for a thin (.45 Colt) rim to be used? My shortened .45 Colt rounds is what I'm getting at.
Bob Wright
|
|