|
|
Post by shaner87 on Jan 8, 2023 12:24:23 GMT -5
I’ve been saving for a bit, and have a bit more to save, but I was wondering if you guys could recommend active gunsmiths who would be capable and are accepting new work.
Looking to get a no5 built in 44 mag.
Thank you!
|
|
|
|
Post by potatojudge on Jan 8, 2023 13:38:37 GMT -5
If I wanted a No 5 right now I’d buy a TLA
If I was to build one, I would save a lot of money by not having the No 5 latch fit, which opens up gunsmith options since it’s mostly grip frame work at that point.
Details of your planned build would help.
|
|
pacecars
.401 Bobcat
Posts: 2,778
Member is Online
|
Post by pacecars on Jan 8, 2023 14:08:20 GMT -5
John Powers maybe?
|
|
pacecars
.401 Bobcat
Posts: 2,778
Member is Online
|
Post by pacecars on Jan 8, 2023 14:08:55 GMT -5
You could get one of Ronnie Wells grip frames to start
|
|
|
|
Post by kings6 on Jan 8, 2023 14:10:58 GMT -5
Like PJ mentioned, if the build does not include the defining base pin latch it pretty much boils down to fitting a new grip frame which a guy can easily do at home if he willing to take his time.
|
|
|
|
Post by Jamey Worrell on Jan 8, 2023 14:12:27 GMT -5
If you're talking an exact copy of the Keith #5, I'd go John Powers...he does a great job with them and would be who I'd pick for that project. As others have mentioned, here's your $$$$ <click on this link>I hit him up a year or so ago after he posted a pic of a #5 he built...not counting the cost of the Colt SAA donor, if memory serves me, you're looking at used car money (including grips and engraving). Lots of weld-up for the rear sight and base pin retention...and even beater SAAs are a couple thousand in this market. |
|
|
|
Post by bushog on Jan 8, 2023 15:14:15 GMT -5
Powers…
|
|
|
|
Post by shaner87 on Jan 9, 2023 9:02:11 GMT -5
Like PJ mentioned, if the build does not include the defining base pin latch it pretty much boils down to fitting a new grip frame which a guy can easily do at home if he willing to take his time. This is something I considered. can the fitting be done with hand tools and a vice? I’m assuming files and various sandpaper. I don’t have to have the base pin latch. |
|
|
|
Post by shaner87 on Jan 9, 2023 9:04:50 GMT -5
Thank you all for the suggestions.
I have thought of trying to track down a TLA, as I am rather fond of them.
I could also do without the latch. Andnow that I think about it I may just forego that and contact bobby tyler.
Looking for a no5 grip and octagonal 5.5 or 6 in barrel. The finer details I haven’t fleshed out yet.
|
|
|
|
Post by potatojudge on Jan 9, 2023 10:11:53 GMT -5
|
|
|
|
Post by jayhawker on Jan 9, 2023 10:45:47 GMT -5
Alan Harton did my #5, no latch. Installed adjustable rear sight, fit Powers #5 grip frame, Powers Bisley hammer, 55.5 inch .44 barrel, bored and chambered 9mm cylinder to .44 Special, all on a 3 screw Blackhawk. Love it.
|
|
|
|
Post by Jamey Worrell on Jan 9, 2023 10:59:58 GMT -5
Thank you all for the suggestions. I have thought of trying to track down a TLA, as I am rather fond of them. I could also do without the latch. Andnow that I think about it I may just forego that and contact bobby tyler. Looking for a no5 grip and octagonal 5.5 or 6 in barrel. The finer details I haven’t fleshed out yet. Have a look at mine from the handgun blueprint thread...sounds like it might be your ticket...RW #5 gripframe, octagonal barrel, color cased/nitred...all done by Bobby...one of my favorites and didn't break the bank... singleactions.proboards.com/thread/11406/handgun-blue-print-thread?page=26 |
|
|
|
Post by Jamey Worrell on Jan 9, 2023 11:02:55 GMT -5
Thank you all for the suggestions. I have thought of trying to track down a TLA, as I am rather fond of them. I could also do without the latch. Andnow that I think about it I may just forego that and contact bobby tyler. Looking for a no5 grip and octagonal 5.5 or 6 in barrel. The finer details I haven’t fleshed out yet. As you're looking, remember that Fermin makes the TLA #5 front sight...I've been trying to find a project to put that beauty on  |
|
|
|
Post by foxtrapper on Jan 9, 2023 11:27:05 GMT -5
Another option , Reeder is looking for blue bisley grip frame,trigger and hammer. He will trade you a #5 grip frame hammer ,trigger and grips . Good start on parts if you have the trading material!
|
|
|
|
Post by Lee Martin on Jan 9, 2023 12:03:13 GMT -5
I just bought a Ruger flattop 5.5" .44 Special. Added a RDW original #5 gripframe, Power Custom trigger and Bisley hammer, and a #5 basepin. It isn't a clone, but in many ways is improved. Ruger's rear sight is fully adjustable. Plus there's no functional reason to have Elmer's #5 latch when you can buy a Belt Mountain.  -Lee www.singleactions.com"Chasing perfection five shots at a time" |
|
