|
|
Post by sixshot on Oct 6, 2015 12:48:21 GMT -5
The narrow sight really makes a difference for us with older eyes, hope you enjoy it. Testing mine today to see where the long range notch zeroes.
Dick
|
|
5shot
.30 Stingray
Posts: 197 
|
Post by 5shot on Oct 9, 2015 18:03:11 GMT -5
What size drill is required?
|
|
|
|
Post by willardotto on Oct 9, 2015 20:43:21 GMT -5
What size drill is required? #52 |
|
5shot
.30 Stingray
Posts: 197
|
Post by 5shot on Oct 9, 2015 20:45:57 GMT -5
Thanks
|
|
|
|
Post by sixshot on Oct 10, 2015 17:04:20 GMT -5
The next batch of sights will be pre drilled, all you will have to do is remove the old sight & put the new one in & put the roll pin back in.
Dick
|
|
gman50
.30 Stingray
Posts: 195
|
Post by gman50 on Oct 10, 2015 18:09:59 GMT -5
I'm in for one if available. Thaks!
|
|
gman50
.30 Stingray
Posts: 195
|
Post by gman50 on Oct 10, 2015 18:10:32 GMT -5
Should've read Thanks!
|
|
xlch
.240 Incinerator
Posts: 51
|
Post by xlch on Oct 10, 2015 18:26:37 GMT -5
Got mine , thanks Dick
|
|
5shot
.30 Stingray
Posts: 197
|
Post by 5shot on Oct 11, 2015 0:42:46 GMT -5
The next batch of sights will be pre drilled, all you will have to do is remove the old sight & put the new one in & put the roll pin back in. Dick Do all the SBH's have the hole in the correct place? Also, is there a purpose to the gap between the rear portion of the sight base and the sight blade? |
|
ryan
.30 Stingray
Posts: 402
|
Post by ryan on Oct 11, 2015 5:05:48 GMT -5
I'll take one from the next batch if still available.
Ryan
|
|
|
|
Post by sixshot on Oct 11, 2015 12:57:48 GMT -5
Ruger has the sights mass produced & drilled, we are making these on a CNC machine & I haven't seen one yet that didn't fit after machining. As for the gap you mention I can't explain that. I have more on the way, hopefully next week. The 4 I have left are sold. Thanks,
Dick
|
|
|
|
Post by 2 Dogs on Oct 11, 2015 13:17:43 GMT -5
Dick must have Callshot running that CNC machine!
Talk about asleep at the wheel...,
|
|
|
|
Post by sixshot on Oct 11, 2015 16:18:34 GMT -5
Fermin, I think Callshot has been going day & night, not sure how much machining he's been doing!
Dick
|
|
sal
.30 Stingray
Posts: 315
|
Post by sal on Oct 11, 2015 22:54:06 GMT -5
OK Dick, go ahead and drill the sight for my son Thanks
|
|
cmillard
.375 Atomic
MOLON LABE
Posts: 1,997
|
Post by cmillard on Oct 12, 2015 11:11:00 GMT -5
I will take one too. thanks
|
|
