|
Post by 2 Dogs on Sept 17, 2023 17:19:35 GMT -5
Older gentleman in the local area had it setup for C.A.S.S., barrel cut to 4 3/4", top strap milled to look like a Vaquero, and a Vaquero style front sight. I need a new front sight soldered on one of these days. Shoots reasonably well with the 32-20 cylinder, leads like crazy with the H&R cylinder. That’s because the 32 and 40 caliber Buckeyes were issued with undersized cylinder throats. A simple way to check is to see if a jacketed component bullet will pass through your throats. I have the correct reamers to correct both. Let me know if I can help. Fermin 361-960-3697
|
|
|
Post by 2 Dogs on Sept 7, 2023 19:44:52 GMT -5
If anyone is seriously interested in a maximum frame 5 shot big bore PM me your contact information and I have some inside information for you. Fermin
|
|
|
Post by 2 Dogs on Sept 6, 2023 20:51:04 GMT -5
Freedom Arms would be the first place I would consider.
|
|
|
Post by 2 Dogs on Sept 5, 2023 14:01:20 GMT -5
That's great. I have listened to every episode so far of the HHI podcast. I have heard from several of our members here on it -- Fermin, Randy, Trapr, maybe more. Not to mention Bowen and Reeder. It's a very entertaining and informative podcast. If you join HHI you can listen in about 2 weeks sooner.
|
|
|
Post by 2 Dogs on Sept 4, 2023 18:32:12 GMT -5
Our heat index today was 119 degrees. No casting happening here…
|
|
|
Post by 2 Dogs on Sept 3, 2023 9:37:10 GMT -5
Sir, for a Colt SA, by far the best is Alan Harton at Single Action service.
After thinking about it for a sec, you could keep your original cylinder and barrel and have Harton fit a USFA cylinder (which are a bit stouter than the originals), and make or fit replacement barrels so that if you needed, you could put them back in original condition.
|
|
|
Post by 2 Dogs on Aug 24, 2023 8:22:57 GMT -5
Thanks guys!
|
|
|
Post by 2 Dogs on Aug 21, 2023 16:51:05 GMT -5
Ronnie told me yesterday afternoon that they shipped a pile of rear sights out of his shop! Looking forward to hearing back from you guys!!
|
|
|
Post by 2 Dogs on Aug 20, 2023 8:39:51 GMT -5
|
|
|
Need lead?
Aug 17, 2023 11:02:56 GMT -5
via mobile
Post by 2 Dogs on Aug 17, 2023 11:02:56 GMT -5
Opened my first box today. Ingots look nice and the packaging was very secure. 2 more boxes on the way. How hard is it? I’ll have to get around to testing it when I have a free minute…
|
|
|
Need lead?
Aug 15, 2023 20:14:40 GMT -5
via mobile
Post by 2 Dogs on Aug 15, 2023 20:14:40 GMT -5
Opened my first box today. Ingots look nice and the packaging was very secure. 2 more boxes on the way.
|
|
|
Post by 2 Dogs on Aug 13, 2023 14:48:07 GMT -5
I’m absolutely interested! Just have to many irons in the fire!
|
|
|
Post by 2 Dogs on Aug 12, 2023 8:14:27 GMT -5
Guys, I wouldn’t dither.
This is a pretty good sized batch but it’s not infinite…
|
|
|
Need lead?
Aug 11, 2023 19:59:42 GMT -5
via mobile
Post by 2 Dogs on Aug 11, 2023 19:59:42 GMT -5
Any idea on what the composition actually is? Probably the only way you will have that is to buy from Rotometals.
|
|
|
Post by 2 Dogs on Aug 11, 2023 12:31:19 GMT -5
Just ordered a #7 standard. My kinda news! Thank you Sir!!
|
|