|
Post by 2 Dogs on Aug 11, 2023 9:03:24 GMT -5
This works out to a Large (very insulated and heavily taped) flat rate box of approximately 70 pounds of sweetened range recovery lead cast in ingots to best fit the box delivered to your door for 115 US.
I’m going to get a box every month.
About a dozen guys have inquired so far.
|
|
|
Post by 2 Dogs on Aug 10, 2023 18:00:37 GMT -5
MAN, DO I LIKE SHOOTING WITH THESE SIGHTS. WAS OUT AT THE RANGE ON THE RIO GRANDE THIS MORNING WITH THE SINGLE SIX 22lR AND THE SHORTY 45COLT/45ACP BLACKHAWK CONVERTIBLE, THEY DO MAKE A DIFFERENCE FOR ME. That’s awesome!
|
|
|
Post by 2 Dogs on Aug 10, 2023 11:55:39 GMT -5
Ronnie Wells has the perfect grip frame for the BFRs. I’ve had my hands on it in his shop. I can’t wait to get one for myself! Far exceeds the factory units and you don’t have to wait for the factory unit to be modified not for grips to be custom made. What's he calling this one? The Dealer with the Bisley trigger guard.
|
|
|
Post by 2 Dogs on Aug 10, 2023 9:21:10 GMT -5
I found a great source for lead for casting! PM me with your contact information and I’ll fill you in. Please include your phone number.
|
|
|
Post by 2 Dogs on Aug 10, 2023 9:00:01 GMT -5
Ronnie Wells has the perfect grip frame for the BFRs. I’ve had my hands on it in his shop. I can’t wait to get one for myself! Far exceeds the factory units and you don’t have to wait for the factory unit to be modified not for grips to be custom made.
|
|
|
Post by 2 Dogs on Aug 9, 2023 19:50:06 GMT -5
Ryan Ross works on BFRs.
|
|
|
Post by 2 Dogs on Aug 6, 2023 11:12:50 GMT -5
GUYS, PLEASE PLEASE PLEASE PUT ANY AND ALL OF THE COMMENTS REGARDING OUR REAR SIGHTS IN THIS THREAD.
Your comments and questions are important to Ronnie and me and we are determined to meet your needs, answer your questions, AND deal with all of the Ruger rear sight variations as we discover them.
I bet Ronnie has more Rugers taken apart in his shop (48) than most guys have Rugers. Come to find out there’s yet another variation we did not address. While that information was a bit of a surprise it ain’t going to be a problem to address. BUT if we miss your post then we all lose out on that pertinent information.
We very much appreciate your comments and concerns and don’t want you to take this as criticism but instead as a way to be sure we don’t leave anyone or anything out!
Thanks fellas!!
|
|
|
Post by 2 Dogs on Aug 4, 2023 19:56:59 GMT -5
Ronnie has more Rugers taken apart in his shop than most guys own.
I know that man. He won’t rest until every mystery is solved…
|
|
|
Post by 2 Dogs on Aug 4, 2023 12:58:56 GMT -5
They look great. Im not offended by the set screw but just had to ask questions about its purpose. Your hard work is never in question. These inserts look to be an excellent advancement. You gotta know I was gonna pull your leg a little brother!!
|
|
|
Post by 2 Dogs on Aug 4, 2023 6:49:53 GMT -5
Ronnie and me are kinda interested to see what blade design will be the most popular. Right now I think it the No7 with it’s white square outline.
For my seniors who are challenged by their computer you can also call me directly to order your rear blade. I should have them on my own website as well here pretty soon.
Fermin 361-960-3697 fermincgarza.com
|
|
|
Post by 2 Dogs on Aug 4, 2023 6:42:56 GMT -5
I do not have one to try out, so Im just asking questions. How do these work when adjusted left or right to accommodate off center front sights? CHANGING THE REAR SIGHT BLADE WILL NOT IMPACT THE FRONT BLADE. Does the set screw easily gall the aluminum Ruger sight body? THE SCREW IS STEEL AND RONNIE HAS TORTURE TESTED THESE BLADES FOR STRENGTH SO IF YOU GO GORILLA ON THAT SCREW YOU COULD PROBABLY INJURE THE ALUMINUM. Will the blade stay in place without the set screw? THE SET SCREW IS A FAILSAFE SINCE MANY GUYS SHOOT SOME PRETTY HEAVY LOADS. I GET THE IMPRESSION THE SET SCREW OFFENDS YOU BUT IF YOU FOCUS ON THE FRONT SIGHT LIKE YOU SHOULD IT DISAPPEARS. Are you continuing to develop the design, so a 2nd generation might be expected once more bugs are worked out through buyer feedback? THIS UNIT IS WELL BUGGED OUT AND FEATURES MANY SUBTLE DESIGN CHARACTERISTICS. FOR EXAMPLE, EVERY SURFACE FALLS AWAY FROM THE SURFACE OF THE REAR BLADE ITSELF NOT ONLY CONTRIBUTING TO THE SLEEK DESIGN BUT THE LACK OF THE PRESENCE OF ANY SURFACE TO REFLECT LIGHT ALLOWS A MUCH CLEANER SIGHT PICTURE. Are any of the reviewers pulling their Bowen sights, and swapping back to a Ruger with the insert? I WILL LET THE REVIEWERS SPEAK TO THAT.
|
|
|
Post by 2 Dogs on Aug 2, 2023 22:27:18 GMT -5
"These work well with ... and all of the redhawks and GPs..."
sir, pardon the naivety of a rookie, but does that also mean Super Redhawks?
Yes Sir.
|
|
|
Post by 2 Dogs on Aug 2, 2023 20:16:49 GMT -5
Will they work on OM sights? Yes. Except I’m thinking the OM Flattop might require its own variation.
|
|
|
Post by 2 Dogs on Aug 2, 2023 20:15:30 GMT -5
I JUST RECEIVED 3 TEST SIGHTS THIS WEEK. I MAY BE THE "IF HE CAN INSTALL IT ANYONE CAN" TESTER. I HAVE ALREADY SWITCHED OUT 2, 1 WITH THE RS ASSEMBLY OFF THE GUN AND 1 WITH THE RE ASSEMBLY ON TE GUN. ALL I HAD WAS SOME VERBAL INSTRUCTIONS, AND I HAD NEVER CHANGED OUT A RUGER RS BLADE. GETTING THE ORIGINAL RS BLADE OUT TOOK ME THE MOST TIME, INSTALLATION OF THE RW 2 DOGS RS WAS EASY. GOT TO SAY THESE ARE REALLY GOOD LOOKING SIGHTS, AND THEY ARE AVAILABLE AND, @ $70 BUCKS, REASONABLY PRICED. I WILL SHOOT A SINGLE SIX 22lr WITH ONE IN THE MORNING. I wasn’t so sure. I was anxious enough to consider having an ambulance on standby in case you lost a finger or two….
|
|
|
Post by 2 Dogs on Aug 2, 2023 19:06:32 GMT -5
These rear blades are all about glare repair. From the test targets we have seen from the guys doing the field testing we know we are on the right track. Everything from the angle of the rear blade to the rear notch “funnel” to diffuse the light to the anchor screw has been geared to allow you to see the sights better.
If you can see them better then you can shoot better. I do get a kick out of teasing Ronnie and calling them the 2DW rear blade but he just teases me back. But we are very proud and excited to bring these to the table.
I can’t heap enough praise on Ronnie because in 2019 I pulled into his shop with a rough tool room version of my sight and he has delivered us a very precise unit that we can all use and enjoy. There was never any question that we could produce a high quality product, it was more about how to manufacture it without compromising quality or making it too expensive. Ronnie literally spent countless hours trying countless methods and after many weeks of 12-14 hour days he got it where we can offer it for 70 bucks per unit. He has programmed in different heights, notches, serrations, and had to jump through a few hoops to get them to blue properly. As soon as he had them s all down he immediately started working on the Flattop version. He is truly a multi-dimensional thinker.
Guys are already calling me and I am actively taking orders. It’s pretty simple just call me at 361-960-3697. I’ll text or email you some pictures of the 10 different styles we offer and we’ll get you fixed up. Tomorrow he and I will do a “how to install” video and we will have these on our websites before long. In the meantime I look forward to your calls.
|
|