|
|
Post by tas6691 on Feb 5, 2012 13:27:37 GMT -5
Tas6691, I need to know if you intend to install your front sight with a screw or if you intend to silver solder it on? Otto, got it, thanks. PM sent....screw on for a single six please |
|
|
|
Post by 2 Dogs on Feb 5, 2012 15:09:22 GMT -5
Got it bro.
|
|
|
|
Post by bushog on Jan 30, 2018 19:59:04 GMT -5
Bump for the guy looking for a sight...
|
|
|
|
Post by dougader on Jan 30, 2018 20:09:23 GMT -5
Is it possible to post updated pics for these?
|
|
gman50
.30 Stingray
Posts: 195
|
Post by gman50 on Jan 30, 2018 20:17:39 GMT -5
Thanks for the bump!
|
|
|
|
Post by lscg on Jan 30, 2018 20:37:50 GMT -5
|
|
|
|
Post by 2 Dogs on Jan 30, 2018 22:39:45 GMT -5
Ok, at last report, I had a list of some 65 or so people waiting for sights for the Single Six and the BFRs. Before we could get them back into production, the guy building them, had a traffic accident that he will be recovering from for some time.
I also wanted to offer them at about half of what we did before but that is going to require a change of gears and take a bit of a investment. Rest assured, they are coming, and we will be offering them for far less than before or anyone else.
|
|
76gt80
.240 Incinerator
Posts: 45
|
Post by 76gt80 on Feb 1, 2018 23:55:23 GMT -5
please put me down for 2 of the screw on single six please
|
|
|
|
Post by pbcaster45 on Feb 6, 2018 11:34:43 GMT -5
I need one for my Bisley Single Six .32 H&R Magnum, how do I get in line?
Are they taller than the factory sight? My gun shoots high.
|
|
|
|
Post by 2 Dogs on Feb 6, 2018 11:45:16 GMT -5
I'm about 6 weeks or so out give or take. I will be all over this soon. There won't be a line. I am going to have enough to do a good number at an introductory price.
Yes, these are blanks, they are plenty tall. You can file it to fit and any smith can toss it in his tank and blue it for you, or if you need me to handle that I'm pretty sure I am going to be able to cut them to your desired height, serrate, and blue for additional.
We are fixing to get all over this.
|
|
jfo4
.30 Stingray
Posts: 343
|
Post by jfo4 on Feb 6, 2018 11:57:44 GMT -5
How do you get on the list?
|
|
|
|
Post by squigz on Feb 6, 2018 12:02:01 GMT -5
If you're still doing these for BFRs, I'd like to be put on the purchase list for one(1)!
|
|
|
|
Post by whiterabbit on Feb 6, 2018 13:58:08 GMT -5
If there is no list, no line, and you'll have a run enough for everyone at first go, I hope you are making them in the hundreds, cause that's how many you will sell if you have the 50+ folks interested you mentioned  I missed the boat last time, so I'm definitely not gonna let that happen again! |
|
|
|
Post by 2 Dogs on Feb 6, 2018 14:01:23 GMT -5
The BFR guns require a difference radius cut on the base. Those might be a little longer, but we did promise so many guys we just have to do them. The milling machines we were using before are busy and we have purchased another and have to get it in place. But we will get it done.
|
|
|
|
Post by dougader on Feb 6, 2018 14:01:40 GMT -5
I need one of those, too, 2 Dogs!
|
|
