|
|
Post by AxeHandle on Nov 14, 2024 8:18:46 GMT -5
Sold my 300 VJR TC. Skimming thought the stuff I run up on the 17 Mach IV I loaded for the matching Vern Juenke built 17 Mach IV. A 221 fireball necked to 17. Thinking I need to get it out to play. Here are old pictures of it. I'm thinking we need new pictures....   |
|
|
|
17 Mach IV
Nov 14, 2024 18:28:38 GMT -5
via mobile
Post by blackhawk44 on Nov 14, 2024 18:28:38 GMT -5
...and at least sox.
|
|
|
|
Post by AxeHandle on Nov 17, 2024 9:04:52 GMT -5
How about I just paint my nails?  |
|
|
|
Post by AxeHandle on Nov 17, 2024 9:10:21 GMT -5
Vern wrote he used tapered hinge pins and larger hinge pins. Never took the forearm off the 300 VJR to check the pin in it. I'll actually look at this one. And post pictures!  |
|
|
|
17 Mach IV
Nov 17, 2024 13:19:41 GMT -5
via mobile
Post by bigbore5 on Nov 17, 2024 13:19:41 GMT -5
I like the 17 Mach IV in my Contender. Very efficient and stops groundhogs cold. I've hit them before and wasn't even sure I did because they didn't seem to move. Just instantly dead.
|
|
|
|
Post by rickiesrevenge on Nov 17, 2024 17:53:54 GMT -5
I love 17s! Mach IV is a good one.
|
|
|
|
Post by AxeHandle on Nov 18, 2024 15:33:00 GMT -5
|
|
|
|
Post by AxeHandle on Nov 18, 2024 15:33:18 GMT -5
|
|
|
|
Post by AxeHandle on Nov 18, 2024 15:33:39 GMT -5
|
|
|
|
Post by AxeHandle on Nov 19, 2024 13:44:25 GMT -5
FWIW tapered hinge pin in this one.
|
|
|
|
Post by AxeHandle on Nov 19, 2024 13:47:22 GMT -5
Loads from December 2002. The brass has never even fire formed. Working through that now. FWIW the cases are a micro smidgen long. The action does NOT want to close. 25 Grain Berger 14.5 grains of H4198  |
|
|
|
Post by AxeHandle on Nov 19, 2024 13:47:43 GMT -5
|
|
|
|
Post by AxeHandle on Nov 19, 2024 13:47:54 GMT -5
|
|
|
|
Post by AxeHandle on Nov 19, 2024 13:48:09 GMT -5
|
|
|
|
Post by AxeHandle on Nov 19, 2024 13:48:20 GMT -5
|
|
