|
|
Post by pacecars on Oct 19, 2024 15:08:26 GMT -5
So I did a thing and have some questions. I will soon have a Freedom Arms 97 .45 Colt with a 4 5/8” barrel. I am going to carry and use this one with iron sights. I need to call Fermin for the front sight. This is my first center fire Model 97 so is there anything I need to know about them or anything they might need? I have a .454 Model 83 so I don’t need a “Rocks and Dynamite” load. I am going to try a 200 gr to 250 gr cast bullet at 900 - 1100 FPS. I need to clean it up to see what I have.   |
|
Fowler
.401 Bobcat
Posts: 3,664
|
Post by Fowler on Oct 19, 2024 15:12:32 GMT -5
Be careful with the length of your reloads, that cylinder was designed for SAAMI spec 1.600” OAL loads. A lot of Keith style SWC loads have to be deep seated over the driving band, the 270-SAA comes to mind.
|
|
|
|
Post by Encore64 on Oct 19, 2024 15:22:37 GMT -5
Great grab and I sent you a text.
Oh, how I'd like to get my hands on that and make it look better than new for you!!!
|
|
gnappi
.375 Atomic
Posts: 1,602
|
Post by gnappi on Oct 19, 2024 15:29:53 GMT -5
The only thing I have thought was needed is a dab of UV set paint on the front sight. Even though my vision is still 20/20 my eyes do better with some contrast up front.
|
|
|
|
Post by paul105 on Oct 19, 2024 15:31:00 GMT -5
For me, that's a perfect configuration - 4 1/4", fluted cyl and white micarta grips - been looking for one in .44 special for ages. . With that said, I have a 4 1/4" (also 3.5" round butt) both .45 Colt. I have shot litterly thousands of RCBS 270 SAA (actual weight 280+-) over 7.8gr HP38 deep seated and crimped over the front drive band (CAUTION _ LOAD EXCEEDS SAAMI). .  . These chrono a little over 900 fps in my 4 1/4" bbl. .  . Lot's of options - if you need more info I may have it. . Paul Pay heed to Fowler's 1.600" OAL |
|
harold89
.30 Stingray
Posts: 362
Member is Online
|
Post by harold89 on Oct 19, 2024 16:14:39 GMT -5
Congrats! I have something very similar on order so following.
|
|
|
|
Post by Encore64 on Oct 19, 2024 16:53:27 GMT -5
The earlier FA97s had a rim recess large enough to chamber 45 Schofield while later ones would not. Ditto on the FA83 454 Casulls.
I've got both an older and new FA97 45 Colt. The Schofield was so impressive in the older gun that I sent the newer gun's cylinder to Clements for him to open the recesses to accept the brass.
I highly recommend this modification if your gun doesn't already accept the brass.
I'm sure the hysterical will recommend against this, but it's an ace in the hole for handloaders...
|
|
|
|
Post by jeffer on Oct 19, 2024 18:35:48 GMT -5
Congrats on buying your new favorite pistol. You're going to love it! I have saddled on the 250 XTP. Longshot makes for a great load. You can max out with h110, but not much fun to shoot.
|
|
|
|
Post by jeffer on Oct 19, 2024 18:36:38 GMT -5
I think I read somewhere that every time someone buys an FA 97, an angel gets its wings...
|
|
|
|
Post by 45MAN on Oct 19, 2024 20:47:46 GMT -5
I HAVE A 7.5" MODEL 97 45 COLT AND IT IS A FAST SHOOTER GIVING EXCELLENT MV. 9.5grs - 10.5grs OF UNIQUE WITH THE COMMERCIALLY CAST/POWDER COATED 250gr RNFP OR THE 255gr SWC ("S&W LOADS") SHUD EASILY GET YOU WHERE YOU WANT TO BE.
|
|
|
|
Post by bigbore5 on Oct 19, 2024 20:51:54 GMT -5
Honestly I really like the 250gr Lyman 452664 rnfp. It's got a very generous flat meplat and is extremely accurate out to the 50yds I shoot it. Hammers deer pretty good too. Chambers in old Colts, 97's, and even my 1911!
|
|
|
|
Post by 45MAN on Oct 20, 2024 7:42:55 GMT -5
Congrats on buying your new favorite pistol. You're going to love it! I have saddled on the 250 XTP. Longshot makes for a great load. You can max out with h110, but not much fun to shoot. jeffer: BEEN THINKING OF GETTTING SOME 250 XTP's FOR MY 45 COLT MODEL 97. DO THEY FIT IN THE CHAMBER WITHOUT TRIMMING THE BRASS? |
|
|
|
Post by Encore64 on Oct 20, 2024 8:17:28 GMT -5
Congrats on buying your new favorite pistol. You're going to love it! I have saddled on the 250 XTP. Longshot makes for a great load. You can max out with h110, but not much fun to shoot. jeffer: BEEN THINKING OF GETTTING SOME 250 XTP's FOR MY 45 COLT MODEL 97. DO THEY FIT IN THE CHAMBER WITHOUT TRIMMING THE BRASS? Not Jeffer, but yes they do... |
|
|
|
Post by jeffer on Oct 20, 2024 8:19:16 GMT -5
jeffer: BEEN THINKING OF GETTTING SOME 250 XTP's FOR MY 45 COLT MODEL 97. DO THEY FIT IN THE CHAMBER WITHOUT TRIMMING THE BRASS? Not Jeffer, but yes they do... Yep like they were made for it! |
|
|
|
Post by 45MAN on Oct 20, 2024 10:53:21 GMT -5
I ASKED ABOUT THE 250 XTP BECAUSE THE GENT I GOT THE GUN FROM WAS HAVING TO TRIM CASES TO GET THE 240 XTP MAG TO FIT. I AM GOING TO BUY SOME OF THE HORNADY 250 XTP's, YOU CANNOT EVER HAVE TOO MANY 45 COLT BULLETS.
|
|
