|
|
Post by Big Bore on Jul 26, 2025 19:50:56 GMT -5
|
|
|
|
Post by Big Bore on Jul 28, 2025 19:17:25 GMT -5
Finished up one of my Texas Sidekick holsters and yet another set of grips (ironwood) for my 6” Freedom Arms M83 in .44 magnum.   |
|
|
|
Post by bigbrowndog on Jul 28, 2025 20:54:16 GMT -5
Those look purty!!.,….buddy
Trapr
|
|
|
|
Post by bigbrowndog on Jul 28, 2025 20:54:34 GMT -5
Those look purty!!.,….buddy
Trapr
|
|
ridenshoot
.327 Meteor
If it ain't broke, don't fix it.
Posts: 640
|
Post by ridenshoot on Jul 29, 2025 5:58:30 GMT -5
Ahhh, that stitching is immaculate. Bravo!
|
|
|
|
Post by Gunny268 on Jul 30, 2025 14:56:18 GMT -5
Figured that while waiting on one of RW's hammers to come in, I'd do the final fitting on a stainless birdshead grip frame to my NM Single Six. And, as predicted, nothing is ever really flat.   |
|
|
|
Post by stubshaft on Jul 30, 2025 17:25:41 GMT -5
Changed my stock trigger on one of my Ruger #1's to a Jard.  |
|
|
|
Post by coltlover on Aug 1, 2025 21:33:45 GMT -5
Threw this together this morning before work. Been collecting parts for a while. Did a Bisley conversion on a 32H&R SSM I had laying around. Had grip frame plated in Nickle Boron. Fermin Garza front sight. Steel ejector rod housing w/ bullseye ejector rod. Reduced power spring kit.  |
|
|
|
Post by kings6 on Aug 1, 2025 22:18:17 GMT -5
A native Alaskan friend sent down a piece of pinniped material and asked me to make a set of grips for an old model Ruger XR-3 grip frame he has.   |
|
|
|
Post by coltlover on Aug 1, 2025 23:39:44 GMT -5
A native Alaskan friend sent down a piece of pinniped material and asked me to make a set of grips for an old model Ruger XR-3 grip frame he has. Damn, that's gorgeous. What could I do to get your friend to pinnipe me some material? |
|
|
|
Post by Big Bore on Aug 4, 2025 19:32:58 GMT -5
|
|
|
|
Post by 45MAN on Aug 4, 2025 19:55:33 GMT -5
SO RANDY, MY CHEST RIG HOLSTER FROM YOU WILL WORK WITH THIS NEW SLING? SORT OF A "TANKER" STYLE RIG? I LIKE THE OPTION/VERSATILITY OF CHEST RIG/BANDOLIER RIG WITH THE SAME HOLSTER.
|
|
|
|
Post by Big Bore on Aug 4, 2025 20:15:01 GMT -5
SO RANDY, MY CHEST RIG HOLSTER FROM YOU WILL WORK WITH THIS NEW SLING? SORT OF A "TANKER" STYLE RIG? I LIKE THE OPTION/VERSATILITY OF CHEST RIG/BANDOLIER RIG WITH THE SAME HOLSTER. Correct. |
|
|
|
Post by kings6 on Aug 4, 2025 21:35:43 GMT -5
I worked getting three grip jobs shipped and started a set of one piece ivories for a USFA Double Eagle. This one is a challenge because I am trying to keep as much of the original contours for the outer surface of the grips. It was a good until I had to try and cut out the rough shape watching the tracing lines on the back of the grip while the rounded and inconsistent outer side rides on the bandsaw bed. About half way through the first panel I just about pulled my hair out and took it to the mill to machine a flat spot for it to ride on!
This was after taking the beast out for a 3 hour ride of trail clearing and wild blackberry eating!😆
|
|
|
|
Post by squawberryman on Aug 5, 2025 8:15:47 GMT -5
What's pinniped material?
|
|
