|
|
Post by 45MAN on Apr 7, 2024 18:39:15 GMT -5
WHERE CAN I GET SOME, PREFERABLY COATED, OR SOMETHING SIMILAR? BEEN LOOKING BUT HAVE NOT FOUND A SOURCE YET.
I HAVE A BUNCH OF 45 AR BRASS AND A FEW REVOLVERS FOR IT, WANT TO START RELOADING FOR IT.
|
|
|
|
Post by Encore64 on Apr 7, 2024 18:48:02 GMT -5
Rey, I use the Matt's Wadcutters. They're 250 grn but seat very shallow and are ideal for the Auto Rim.
I request Matt make the from the Hardened Alloy @ 18 and coat them.
Hope this helps, Huey
|
|
|
|
Post by randominator on Apr 7, 2024 18:57:38 GMT -5
Message sent.
|
|
|
|
Post by 45MAN on Apr 7, 2024 19:50:36 GMT -5
Rey, I use the Matt's Wadcutters. They're 250 grn but seat very shallow and are ideal for the Auto Rim. I request Matt make the from the Hardened Alloy @ 18 and coat them. Hope this helps, Huey I HAVE SOME OF THE WADCUTTERS, USE 'em IN MY CHARTER 45 COLT. |
|
|
|
Post by Encore64 on Apr 7, 2024 19:51:47 GMT -5
Try them as they are excellent in the Auto Rim...
|
|
|
|
Post by Encore64 on Apr 7, 2024 20:05:47 GMT -5
|
|
|
|
Post by bigbrowndog on Apr 7, 2024 20:05:48 GMT -5
Rey, try those 270gr SWC we got from Dick,…..or some 250xtp’s. They shoot great from my 1917 right at 800-830fps.
Trapr
|
|
|
|
Post by bigbore5 on Apr 7, 2024 20:34:54 GMT -5
I like the 230gr version of the 452490 with the gas check reamed out to plain base. It shouldn't have been a gas check design to begin with and could only possibly need one with the Rowland.
|
|
|
|
Post by boatswainsmate on Apr 7, 2024 21:10:40 GMT -5
I have a LBT 451 240 LFN mold. For some reason they came out weighing almost 270 grains when I made them. I never tried shooting any yet. I could cast them in a different alloy and powder coat them if your interested in trying them.  |
|
|
|
Post by revolvercranker on Apr 7, 2024 21:32:54 GMT -5
|
|
|
|
Post by bushog on Apr 8, 2024 0:25:58 GMT -5
What mold did Miha make a mold for a long/heavy .45 bullet?
I know he did cause I cast a bunch and loaded about a dozen in .45 Colt brass and they’re too long for everything but a long cylinder 5 shot gun…
I’ll see if I can figure it out tomorrow..
|
|
|
|
Post by revolvercranker on Apr 8, 2024 5:19:02 GMT -5
What mold did Miha make a mold for a long/heavy .45 bullet? I know he did cause I cast a bunch and loaded about a dozen in .45 Colt brass and they’re too long for everything but a long cylinder 5 shot gun… I’ll see if I can figure it out tomorrow.. I believe they were a 300 some grain hollow point called For Ruger Only. I have the mold. I shoot them from my 450 Bushmaster. The are entirely too big for the 45 AR. |
|
|
|
Post by bigbore5 on Apr 8, 2024 7:23:59 GMT -5
It is the Ruger only. Designed for the Redhawk is my understanding.
|
|
|
|
Post by bushog on Apr 8, 2024 8:49:15 GMT -5
What mold did Miha make a mold for a long/heavy .45 bullet? I know he did cause I cast a bunch and loaded about a dozen in .45 Colt brass and they’re too long for everything but a long cylinder 5 shot gun… I’ll see if I can figure it out tomorrow.. I believe they were a 300 some grain hollow point called For Ruger Only. I have the mold. I shoot them from my 450 Bushmaster. The are entirely too big for the 45 AR. Nope….different mold |
|
|
|
Post by boatswainsmate on Apr 8, 2024 10:28:50 GMT -5
The first bullet is the Lyman 452423 and the 3rd is the LBT 452 280 WFN.  |
|
