|
|
Post by rugerno1 on Dec 3, 2022 18:08:11 GMT -5
Well the day has finally come, my new mount is finished and available. It has the same design as the Flattop model, uses the rear sight screw and rear sight cross pin. The new mount will also come with a Shim Pack that will allow you to tailor fit the mount to your specific gun. Adjustments as small as 0.001"! The new mount will fit the Ruger Blackhawk, Super Blackhawk, Redhawk, Super Redhawk, GP100, Security Six, and Single Six models and most of their variations. I've added a new gallery page to the website with tons of pictures of all different models so be sure to check that out.
Here is a teaser photo on a short 45 Colt Bisley.
Here's the link to the product page:
|
|
|
|
Post by bushog on Dec 3, 2022 18:31:24 GMT -5
This is great news! Is there a discount if you buy by the dozen?  |
|
|
|
Post by iwsbull on Dec 3, 2022 18:34:36 GMT -5
Excellent
|
|
pleadthe2nd
.327 Meteor
Enter your message here...
Posts: 881
|
Post by pleadthe2nd on Dec 3, 2022 18:46:23 GMT -5
Funny this thread came up, I just mounted my new Griffon Hill mount to my old model flattop, with a Vortex venom, everything lined up , and fit perfectly, I did have to shorten the supplied mounting screw , just enough to recess it in the topstrap,which was explained to me in an email sent by Dan, no problem, other than that, the screw hole lined up and seems to be very solid, will take to range for a full function test as soon as possible.
|
|
sj6g
.30 Stingray
Posts: 114
|
Post by sj6g on Dec 3, 2022 19:05:41 GMT -5
Got one on the way as soon as I saw the email. Can’t wait!
|
|
|
|
Post by rugerno1 on Dec 3, 2022 19:31:59 GMT -5
Got one on the way as soon as I saw the email. Can’t wait! You were definitely the fastest one of the group. The mount will be headed your way Monday morning, thanks sj6g! |
|
|
|
Post by kings6 on Dec 3, 2022 20:08:15 GMT -5
Did I miss the website info?
|
|
pleadthe2nd
.327 Meteor
Enter your message here...
Posts: 881
|
Post by pleadthe2nd on Dec 3, 2022 20:11:34 GMT -5
Did I miss the website info? There's a link in the first post of this thread -gallery page- |
|
|
|
Post by bigbore5 on Dec 3, 2022 20:14:37 GMT -5
Can't get the link to work.
|
|
|
|
Post by iwsbull on Dec 3, 2022 20:15:21 GMT -5
Me neither too.
|
|
|
|
Post by rugerno1 on Dec 3, 2022 20:26:11 GMT -5
Link should be fixed now, sorry about that. You can also go to the home page www.griffonhill.com and look under Products |
|
|
|
Post by drycreek on Dec 3, 2022 22:03:31 GMT -5
Got my notification email today, now to figure out which one to try it on.  Thanks ! |
|
|
|
Post by 45MAN on Dec 3, 2022 22:27:14 GMT -5
GREAT NEWS, EXPECT TO ORDER AT LEAST 1
|
|
|
|
Post by needsmostuff on Dec 4, 2022 10:44:17 GMT -5
Please explain the shimming and shim pack thing.
Is that top to bottom or side to side shimming?
Pictures of shims (if you have them) are worth a gazillion words.
|
|
|
|
Post by rugerno1 on Dec 4, 2022 12:26:08 GMT -5
The shims are used for side to side shimming inside the rear sight pocket. They are made from polyester plastic and color coded for different thicknesses. Each mount comes with 8 shims in 4 different thicknesses. Here is a picture showing a shim on one side. Depending upon your gun/model it may take 1 shim or a couple shims. |
|
Thanks !
