|
|
Post by longoval on Feb 5, 2022 14:55:27 GMT -5
I ordered four sets of grips for three grip frames recently from Chad at Chigs Grips.
3-3/4" New Vaquero Sheriff's Model in 44 Special
- Ebony (not pictured) - American Holly 5-1/2" NM Flattop Blackhawk in 44 Special - Exhibition Grade Turkish Walnut 6-1/2" NM Single Six in 32 H&R Mag - Exhibition Grade English Walnut I traded a good number of emails with Chad. I specified all of my grips to have flat-bottoms and matte/satin finish. I showed him some pictures of grips that I had that I liked and included the thickness measurement that I prefer. He was great to work with and very accommodating.
I can highly recommend Chigs. I always say you can't beat a pair of SK stocks. I stand by that, but the value that Chad offers is unbeatable. His pricing is incredible and the lead time even more impressive. My grip frames probably spent as much time with USPS as they did with Chad. I suggest checking out the blanks he has available that are listed on his webpage; if you don't see what you want, email him. Since this is the Gallery, here are some pictures. Group shot:  American Holly:
  Turkish Walnut:
 
English Walnut:
Again, the flat-bottoms and uniform thickness is my preference so don't let those features turn you away. I do not know Chad and I am not affiliated with him in anyway. Just an honest review.
|
|
|
|
Post by Encore64 on Feb 5, 2022 14:57:32 GMT -5
Absolutely Beautiful!!!
|
|
|
|
Post by bigbore5 on Feb 6, 2022 9:32:44 GMT -5
Most of my grips come from Chigs. I've never had any disappointment with them
|
|
|
|
Post by pacecars on Feb 6, 2022 10:21:21 GMT -5
I am sending him a FA83 for some Ironwood grips
|
|
|
|
Post by longoval on Feb 7, 2022 21:05:02 GMT -5
I am sending him a FA83 for some Ironwood grips The slabs you picked looked great. Please post pictures when you get them, whether this thread or a new one. |
|
|
|
Post by pacecars on Feb 7, 2022 21:22:04 GMT -5
Will do. He is also making the grips for my Ruger Flattop 10mm/.38-40 with Ronnie’s brass Potato Judge Jr grip frame. We have a gorgeous exhibition grade Desert Ironwood to match a custom knife I have. They should both look fantastic when he is done.
|
|
|
|
Post by pacecars on Feb 7, 2022 21:23:44 GMT -5
The grips you had done look great. I really like the Walnut
|
|
|
|
Post by pacecars on Feb 7, 2022 21:24:40 GMT -5
You will love the American Holly. It ages like ivory
|
|
|
|
Post by longoval on Feb 7, 2022 21:35:13 GMT -5
Yes, I did confirm with him that the finish he puts on the grips will allow the Holly to yellow.
The ebony looks great too on that stainless sheriff's model. But it can only wear one set at a time!
|
|
gcf
.30 Stingray
South Texas
Posts: 316
|
Post by gcf on Feb 8, 2022 14:38:05 GMT -5
Agreed, Chad does a pretty good job on his grips. Especially for the price, I might add. I've been wondering what he uses for a finish - just in case I needed a touch up. Any idea? Shown below on my .45 flat top conversion, are Turkish walnut from Chig's. Sent him my grip frame, & turn around time was surprisingly fast.     |
|
pleadthe2nd
.327 Meteor
Enter your message here...
Posts: 952
|
Post by pleadthe2nd on Feb 8, 2022 15:35:07 GMT -5
I have not handled his grips, but looks like a finishing wax to me, which is easily repairable, I use Briwax, but the minwax would work as well
|
|
|
|
Post by longoval on Feb 8, 2022 15:43:15 GMT -5
He uses Spar Urethane.
|
|
|
|
Post by jdpress on Feb 18, 2022 16:50:19 GMT -5
|
|
|
|
Post by longoval on Feb 18, 2022 18:04:06 GMT -5
Love that SBH
|
|
|
|
Post by nfanewbie on Sept 26, 2024 23:57:43 GMT -5
I'm going to revive this old thread because I just got a second set of grips from Chigs. So now I have some spalted maple and walnut. The spalted maple have all types of reds, greens, blacks and other colors in them. It is next to impossible to take a good picture, in the sun they are amazing, artificial light is difficult.   |
|
