|
|
Post by Lee Martin on Apr 20, 2022 10:32:46 GMT -5
Thanks John. They'll easily go 1,400 fps from my .414 Martin Razorback (.414 SuperMags cut to 1.40"). -Lee www.singleactions.com"Chasing perfection five shots at a time" |
|
swc123
.240 Incinerator
Posts: 6
|
Post by swc123 on Oct 22, 2022 14:43:03 GMT -5
@ Lee, just for interest sake, what would your design look like in .357" cal, to fit NM Ruger Blackhawk cylinder. Speaking about the 45-319 AM bullet scaled down. TIA.
|
|
|
|
Post by 41freak on Oct 23, 2022 15:17:05 GMT -5
|
|
swc123
.240 Incinerator
Posts: 6
|
Post by swc123 on Oct 24, 2022 7:37:14 GMT -5
Thank you, I was expecting a .42” long nose length and about 190gr weight using ww?
|
|
|
|
Post by 41freak on Oct 24, 2022 7:48:17 GMT -5
Thank you, I was expecting a .42” long nose length and about 190gr weight using ww? That bullet is scaled-down from the 319gr 45, doing it to 190gr is possible and it would differ slightly from Lee's actual design, but is doable. |
|
|
|
Post by bigbore5 on Oct 24, 2022 8:15:49 GMT -5
Is that an NOE mold catalog mold? |
|
|
|
Post by bushog on Oct 24, 2022 8:42:08 GMT -5
Is that an NOE mold catalog mold? Where’d it go? The others are in the Accurate Molds catalog. |
|
|
|
Post by 41freak on Oct 24, 2022 9:48:12 GMT -5
Is that an NOE mold catalog mold? No it isn't an NOE mold or in their catalog. I drew it up from the question above that asked about a 357 version of the Lee Martin 45-319gr design. If someone wants to submit the design to Tom at Accurate Molds, I am sure he would catalog it and cut the Molds. (If someone does want to submit it, let me get Lee to look it over incase I missed anything drawing it.) |
|
|
|
Post by 41freak on Oct 24, 2022 9:51:03 GMT -5
Is that an NOE mold catalog mold? Where’d it go? The others are in the Accurate Molds catalog. This design hasn't been submitted to Tom. I drew it to answer the question above of what a 357 version would look like. Let me get with Lee and have him look over the drawing and see if I missed anything and if not then someone could submit it and get a mold ordered. |
|
|
|
Post by 41freak on Oct 24, 2022 11:48:36 GMT -5
Lee took a look @ the bullet and said to submit it to Tom @ Accurate Molds, so I will get it submitted this afternoon when I get home.
|
|
|
|
Post by 41freak on Oct 24, 2022 19:42:38 GMT -5
The 357 Lee Martin designed bullet was submitted to Tom @ Accurate Molds. As soon as it is cataloged I will pose the # and drawing.
|
|
|
|
Post by bushog on Oct 24, 2022 20:02:54 GMT -5
The 357 Lee Martin designed bullet was submitted to Tom @ Accurate Molds. As soon as it is cataloged I will pose the # and drawing. Where’s the drawing? |
|
|
|
Post by 41freak on Oct 24, 2022 20:14:41 GMT -5
The 357 Lee Martin designed bullet was submitted to Tom @ Accurate Molds. As soon as it is cataloged I will pose the # and drawing. Where’s the drawing? It is the same one I linked above, for some reason I can't get the pic to show, which is why I had to link to it.  But it seems to have worked this time. |
|
|
|
Post by bushog on Oct 24, 2022 22:04:26 GMT -5
It is the same one I linked above, for some reason I can't get the pic to show, which is why I had to link to it. But it seems to have worked this time. Sorry, got old guy thing going on and didn’t realize you linked it… |
|
|
|
Post by 41freak on Oct 24, 2022 22:31:14 GMT -5
It is the same one I linked above, for some reason I can't get the pic to show, which is why I had to link to it. But it seems to have worked this time. Sorry, got old guy thing going on and didn’t realize you linked it… No problem, I am not sure why I couldn't upload the drawing, but it worked tonight.  |
|
