cable
.327 Meteor
Posts: 686
|
Post by cable on May 3, 2019 11:13:22 GMT -5
|
|
gw425
.30 Stingray
Posts: 365
|
Post by gw425 on May 3, 2019 14:30:37 GMT -5
Wow, that's purdy! Seller is Tyler's Gun Works in Texas I believe.
Greg
|
|
gw425
.30 Stingray
Posts: 365
|
Post by gw425 on May 3, 2019 15:59:22 GMT -5
You should move this to the links section. Some possibly interested people would see it.
Greg
|
|
|
|
Post by sierra11b on May 3, 2019 16:36:39 GMT -5
The CCH looks like waves! I wonder if the CCH process can be manipulated for this effect or if it's strictly random? Sorta like the hamon-line on a katana using clay during heat treatment?
|
|
|
|
Post by bushog on May 3, 2019 16:45:46 GMT -5
The CCH looks like waves! I wonder if the CCH process can be manipulated for this effect or if it's strictly random? Sorta like the hamon-line on a katana using clay during heat treatment? This is in the wrong place...... The coloring is done using CN not a reducing atmosphere, thus it can be laid down in more of a pattern... |
|
|
|
Post by sierra11b on May 3, 2019 16:53:20 GMT -5
The CCH looks like waves! I wonder if the CCH process can be manipulated for this effect or if it's strictly random? Sorta like the hamon-line on a katana using clay during heat treatment? This is in the wrong place...... The coloring is done using CN not a reducing atmosphere, thus it can be laid down in more of a pattern... I see. Thanks for the clarification. Didn't think that process was still used. |
|
|
|
Post by kings6 on May 3, 2019 20:17:35 GMT -5
I don’t understand why if you go to the work of installing a #5 base pin latch you don't weld up the factory cross pin latch holes?
|
|
|
|
Post by potatojudge on May 3, 2019 20:49:18 GMT -5
I don’t understand why if you go to the work of installing a #5 base pin latch you font weld up the factory cross pin latch holes? I had the same thought. Welding shows up in blue finishes. Bone CCH obscures welds. I have no idea how welds react to the CN coloring process, so maybe that's why? Did Huntington do the latch, does anyone know? |
|
|
|
Post by CraigC on May 3, 2019 23:22:33 GMT -5
Maybe it still serves a function?
What I don't understand is why convert an existing .500JRH to a .500Linebaugh??? IMHO, it's a step backwards.
|
|
eskimo36
.375 Atomic
Oklahoma
Posts: 2,071
|
Post by eskimo36 on May 4, 2019 5:50:35 GMT -5
Well, if you look at the bid history, it's pretty obvious where it's going.
|
|
|
|
Post by whitworth on May 4, 2019 6:13:53 GMT -5
Maybe it still serves a function? What I don't understand is why convert an existing .500JRH to a .500Linebaugh??? IMHO, it's a step backwards. It’s not a .500 JRH that was converted to .500 Linebaugh. Much like Hamilton Bowen, Jack didn’t call it a .500 Linebaugh in the early days, but a .500 Mag. |
|
|
|
Post by tyler4656 on May 4, 2019 7:48:39 GMT -5
Thought I would chime in as I don’t often.
This Huntington 500 came out of a recent collection. It also came with two folders full of research and development and documentation and correspondence. I do believe it was ordered with the latch installed by Huntington. There are a few things about this build that I would’ve definitely done differently and one of them was filling that hole. At this point and it’s life I just excepted it for what it was and went on. If we were to have welded the whole it would have hidden completely with our Color Case process. I did take this out and shoot it and it shot like the house on fire. If only some of these projects could talk!
Thanks again Bobby
|
|
|
|
Post by potatojudge on May 4, 2019 8:57:53 GMT -5
Thought I would chime in as I don’t often. This Huntington 500 came out of a recent collection. It also came with two folders full of research and development and documentation and correspondence. I do believe it was ordered with the latch installed by Huntington. There are a few things about this build that I would’ve definitely done differently and one of them was filling that hole. At this point and it’s life I just excepted it for what it was and went on. If we were to have welded the whole it would have hidden completely with our Color Case process. I did take this out and shoot it and it shot like the house on fire. If only some of these projects could talk! Thanks again Bobby Were I in the market, knowing about the documentation would increase my interest and the value of this gun for me. Might be worth posting to the auction. Early builds by the top tier revolver smiths are always interesting to see. Old Linebaugh and Bowen guns have their own quirks. |
|
|
|
Post by needsmostuff on May 4, 2019 9:10:42 GMT -5
The coloring is done using CN not a reducing atmosphere, thus it can be laid down in more of a pattern... CN  ?? Please explain. |
|
|
|
Post by CraigC on May 4, 2019 9:19:09 GMT -5
Maybe it still serves a function? What I don't understand is why convert an existing .500JRH to a .500Linebaugh??? IMHO, it's a step backwards. It’s not a .500 JRH that was converted to .500 Linebaugh. Much like Hamilton Bowen, Jack didn’t call it a .500 Linebaugh in the early days, but a .500 Mag. From the listing: "It has been rechambered and rebarreled from a JRH 500mag to a .500 Linebaugh." |
|
??