A quick rerun of the 311-344 Flying Fist!!

[2 Dogs]

MiHec 311440 (Hammer o' Thor) HP/FP 2 or 4cav GC/PB or Solid 4 or 6 cav GC/PB
MiHec 45 2.1 Design Cramer-type Lyman 311440 (Hammer o' Thor) Penta&Round HP/FP (2 or 4cav) GC/PB or 4 or 6 Cavity Brass and ("Lee Style") Solid Group Buy GC/PB
Greetings Cast Boolit Brothers.



Miha has given the green light to run a very popular 30 Caliber bullet. Great Bullet for 300 Blackout or 30-30. Should cast out between 145-160 depending on Hollow Point option.

Options and details . .
1. Mold will be available in 2 Cavity Brass Solid, 4 Cavity Brass Solid, and 6 Cavity Brass and Aluminum “Lee Style” Solid. Also available in 2 and 4 Cavity Hollow Point with Large Round, Penta and Flat pins.
2. Available in .311 and .314 diameters (WW).
3. (Will Post Official Weights with photo soon)
4. Available in the “Lee Style” 6 Cavity Aluminum also.

Cost is as follows:

Hollow Point Molds
2 Cavity HP all pins included 95 Euro's (80,75 with discount)
4 Cavity HP all pins included 135 Euro's (114,75 with discount)


Solid Molds - Brass
4 Cavity Solid: 95 Euro's (80,75 with discount) including shipping, top punch and allen keys
6 Cavity Solid: 95 Euro's (80,75 with discount) including shipping, top punch and allen keys (need to confirm)

Solid Molds - Aluminum
Lee Style 6 cavity aluminum solid 95 Euro's (80,75 with discount) including shipping, top punch and allen keys

These prices will be converted to us dollars when you get the paypal invoice.

GROUP BUY DISCOUNT OF 15% GIVEN AT INVOICE TIME

Please include your (disguised) email address with your request.
Miha will send out invoices about the time the buy gets closed. Payment's through PayPal (he's in Slovenia). Shipping's direct.

Over here, we call this bullet the Flying Fist as that is what Paco Kelly hung on it for a moniker. None the less, it is a very versatile slug. This buy is currently being run on the cast bullets forum and is already about to close. A quick look showed it had 29 takers so here is your opportunity to tag along on that buy because Miha will close this one at the same time and make these molds at the same time. Note that there are several other mold configurations available. If you don't have this mold realize that those of us who do have it found it to be fantastic. Jeff Hoover and I both got 1400 plus fps out of our Buckeye 32-20's with this bad boy.

In the table below, the Flying Fist is the 2nd bullet from the right for comparison purposes.



4 Cavity GC list

01. Jdoc....jdoc2015 At yahoo dot com....1 mold....(.314" diameter) BRASS
02. Bullseye....tomlennington AT yahoo DOT com....1 mold....(314" diameter) BRASS
03. Jack....jksswage AT yahoo Dot com....1 mold (.314" diameter) BRASS




2 Cavity PB List

01. Sheriff.....crittrcallr AT sbcglobal DOT net....1 mold (314" diameter) BRASS
02. domino300.....dougiep123 AT hotmail dot com....1 mold (.314" diameter) BRASS
03. Bronc...rdbronco at gmail dot com....1 mold (.314" diameter) BRASS

6 Cavity GC List
01. magpouch.....jrayborn AT outlook.com....1 mold (.314" diameter) ALUMINUM

6 cavity plain base list

01. bushog....boo-haaa athot maildot com....1 mold (.314 diameter) ALUMINUM

[sheriff]

2 cavity HP w/ all the pins. crittrcallrATsbcglobalDOTnet

[2 Dogs]

Apr 25, 2018 14:10:55 GMT -5 sheriff said:

2 cavity HP w/ all the pins. crittrcallrATsbcglobalDOTnet

Hi Russ, great chatting with you the other day! Do me a favor and specify a diameter here old buddy. You can do .311" or .314" please.

[jdoc]

4 cavity brass gas check hollow point w/all pins 0.314 OD jdoc2015 At yahoo dot com

Thanks

[sheriff]

oops,.314. Enjoyed the visit, too.

[gamsek]

Photos....

[bullseye]

I'll take one 4 cavity GC/HP mold .314 dia tomlennington AT yahoo DOT com

[scotth]

i wounder how well this would work in the new henry 327 rifle

[boolitdesigner]

Apr 26, 2018 11:42:28 GMT -5 scotth said:

i wounder how well this would work in the new henry 327 rifle

The Henry rifle I have takes about factory length cartridges. It will chamber the Sledgehammer, but not feed from the lifter nor eject it either. You would have to load them so they would work..... crimped somewhere around the dirt groove (first one back of the nose).

[2 Dogs]

Updated 3 molds

[2 Dogs]

This buy is still running!

[domino300]

add me, 2 cavity HP, PB brass, .314

dougiep123 AT hotmail dot com

[magpouch]

Ok I can't resist. I would like a 6 cavity, .314 diameter, gas check mold. Thank you.

jrayborn AT outlook.com

[2 Dogs]

UPDATED

[Bronc]

I am in as well 2 cavity brass, 314 PB , all the pins. rdbronco at gmail dot com