32 Mag/ 327 Fed/ 30 Carbine Miha 314-640 Important UPDATE

[dougphillips]

Alright. I'm in. Put me down for a 4-cavity, plain base, .314", all pins.

dugphilipsataoldotcom

Thanks!!
Doug

[2 Dogs]

Updated

14 molds.

[2 Dogs]

I am at 15 molds.


LAST CALL!!!

[corky]

I'm in.

one 4-cavity gas-check .314" all pins

jdgrant_at_ameritech_dot_net

My plan is to remove the gas-check shank from two cavities
and have the best of both flavors.

Thanks, Jeff

[2 Dogs]

I have you down Jeff, but that is not going to work with a single 4 cavity mold. If you think about it, your sprue plate will be too high up off the 2 cavities you cut down. Better to get 2 two cavity molds. Let me know if you want to change.

[jsh]

Fermin, I have been seeing guys bore the check out. Leaves a long heel. Rearward shift in weight seems to be working well for them.
Jeff

[2 Dogs]

Ok. Works for me. An after action report would be cool to hear.

[corky]

If I bore out the GC shank to full diameter, .314", it should look just like
the plain based version. Any slight variations should smooth out during sizing.
Looking at the drawings, the lube groove is in the same place on both versions.

Jeff

[2 Dogs]

THIS GROUP BUY IS CLOSED

[2 Dogs]

Miha has these mold blocks on the machine.

[rigger]

Wish I'd seen this before it closed.

[2 Dogs]

Miha asked me to filter the buyers list because some buyers came via my email and were not members at SA.COM and thus did not have internet handles.

SO CHECK YOUR EMAIL ADDRESS AND LET ME KNOW IF ANYTHING HAS CHANGED!!

[mihec]

PayPals are out!!!

[Joe S.]

Got it. Paid it.

Thanks!!

[mart]

Got mine and ponied up.