|
Post by dougader on Sept 3, 2015 12:20:20 GMT -5
I kept talking myself out of getting one of these and now it's closed and I wish I'd ordered one.
I've heard he sometimes has a couple extra so I sent him a pm and let him know I'd like one if there are any extra available.
|
|
|
Post by zeus on Sept 3, 2015 15:51:31 GMT -5
There was a possibility that 5 extras would be there but several folks have emailed him I think as well. Those will dry up quickly. If there is enough that still want one, I can always run it again, turnaround just won't be as good. This was just luck and good timing.
|
|
jsh
.327 Meteor
Posts: 884
|
Post by jsh on Sept 4, 2015 19:32:07 GMT -5
Markbo, you might PM mihec with a proper email address. I had not got my invoice either and was advised at castboolits to pm him. No gun, no mold. Got brass, dies, powder and primer. Needed 41 checks so got some .475's while I was at it. Just in case. Jeff
|
|
|
Post by dougader on Sept 5, 2015 11:14:49 GMT -5
I got a request for payment this morning, so there were a few extra moulds like Glenn said. It couldn't hurt to email and/or pm this mould artisan to see if there are any more available.
|
|
|
Post by mrxhillbilly on Sept 6, 2015 7:48:27 GMT -5
I also got a payment request so the five is at least down to two
|
|
jdoc
.327 Meteor
Posts: 727
|
Post by jdoc on Sept 12, 2015 16:05:20 GMT -5
Mold showed up in today's mail. Thanks to Zeus for making it happen.
|
|
|
Post by zeus on Sept 12, 2015 21:04:00 GMT -5
Very cool to see these arriving already! That was fast
|
|
|
Post by fanofthefortyone on Sept 12, 2015 21:16:04 GMT -5
Mine came a couple days ago, I'll see it when I finally get home. Thanks for your work on this. Ronnie
|
|
|
Post by Markbo on Sept 12, 2015 21:29:04 GMT -5
Lets see them! Better yet lets see some boolits out of 'em!!!
|
|
Fowler
.401 Bobcat
Posts: 3,572
|
Post by Fowler on Sept 12, 2015 21:42:50 GMT -5
|
|
|
Post by zeus on Sept 13, 2015 22:37:04 GMT -5
I got a couple of them yesterday as well it seems. Waiting on one more .476 and a .500 version now. The .512 landed last week
|
|
|
Post by Markbo on Sept 14, 2015 14:17:05 GMT -5
Fowler... those are some of the prettiest boxes o' bullets I've ever seen!
|
|
|
Post by dougader on Sept 15, 2015 21:01:39 GMT -5
I got a notice today saying my package is available at the post office tomorrow and it requires a signature... From Slovenia. Woot! Woot!
|
|
gjn
.30 Stingray
Posts: 491
|
Post by gjn on Sept 15, 2015 21:28:31 GMT -5
Awesome looking bullet. Wish this was offered with a gas check.
|
|
|
Post by zeus on Sept 16, 2015 6:12:39 GMT -5
I didn't have any intention of a gas check when we drew this one up. For a soft alloy that will allow expansion, I saw no use for a gas check with those velocities or alloy mixtures. Get alloys hard enough to run it fast enough to need a check and the point of the HP is lost. Run the soft alloys too fast, and the bullet turns inside out. That's why it is what you see. The accuracy of this bullet has been exceptional and I could see no improvement being made by adding a check based on the groups I've shot with this bullet at 25, 50, and 100 yards from the bench. But I do understand that it would give you an option of using a solid bullet with a harder alloy and check it if wanted. Having said that.....I can ask Miha if the new run we have running now could have the option of a gas check. If he can, I'll let you know and will alter the order page over at Cast Bullets forum.
|
|