|
Post by AxeHandle on Jul 30, 2022 20:27:30 GMT -5
Would you consider a reloader unbalanced if he had a Dillon 1050 set up to load 45 ACP with large primers, a Dillon 550 set up to load 45 ACP with small primers, AND another Dillon 550 set up to load 45 Auto Rim? Looking down the bench I see a Dillon 550 set up for 9mm, a Dillon SDB set up for 38 Super, a Dillon 550 Set up for 38 Special, a Dillon SDB set up for 32 S&W Long, a Dillon SDB set up for 38 Short Colt, a Dillon 550 set up for 300BO, and a Dillon 550 set up for 44 Special. Didn't happen overnight. My first Dillon was a 450 that became a 550 when they came out. The rest seemed to just slowly seep in. Last week caught myself looking at the spacing of the loaders on the bench and wondering if another might fit. Maybe just one more....
|
|
aciera
.375 Atomic
Posts: 2,079
|
Post by aciera on Jul 30, 2022 21:05:29 GMT -5
Are they in order by caliber and equally spaced?
|
|
|
Post by Stump Buster on Jul 30, 2022 21:06:20 GMT -5
Unbalanced? No.... Blessed? Yes.
|
|
aciera
.375 Atomic
Posts: 2,079
|
Post by aciera on Jul 30, 2022 21:07:21 GMT -5
Are they in order by caliber and equally spaced? And my hats off to you
|
|
|
Post by leftysixgun on Jul 30, 2022 21:26:43 GMT -5
How square are they to bench? Is there any lean or cant.....?
|
|
|
Post by AxeHandle on Jul 31, 2022 8:38:25 GMT -5
Well played friends.. Well played indeed.. I'll head for the shop with a square and a level ASAP.
|
|
jeffh
.375 Atomic
Posts: 1,606
|
Post by jeffh on Jul 31, 2022 10:04:25 GMT -5
Well played friends.. Well played indeed.. I'll head for the shop with a square and a level ASAP. Yep, unbalanced, but in our world that's a badge of honor.
Sounds like some reasonable challenges have been put forth here.
You know - if you have to respace and square things, any extra mounting-hole showing might necessitate a sheet of stainless on the bench-top to keep primers from falling through. I'd have the supplier break the front edge up just a fuzz so they cases and bullets don't roll off.
|
|
|
Post by foxtrapper on Jul 31, 2022 10:45:50 GMT -5
If your able,why not?
|
|
|
Post by foxtrapper on Jul 31, 2022 10:47:00 GMT -5
|
|
|
Post by AxeHandle on Jul 31, 2022 10:58:28 GMT -5
Frankford Arsenal seems to turn out some special stuff but I'm too deep into Dillon to turn back now... Of course I do have the required RCBS Rockchucker from reloading day one and a Redding Ultra Mag from back before they enlarged the Rockchucker. Then somewhere there is a Lyman Turret for 458 SOCOM and 32-30 and a Hornady Progressive set up to process 556 brass.. Ooops, forgot that Hornady 12 gauge loader back in the back...
|
|
|
Post by 500fksjr on Jul 31, 2022 11:09:14 GMT -5
Dedication to a specific cause!!
|
|
|
Post by contender on Jul 31, 2022 11:49:42 GMT -5
Only 10 Dillon presses? Heck,, I don't think that's OCD at all! I knew a guy once into competition who had 5 Dillons set up so he'd never have to change any adjustments. I was always in a bit of awe at his set-up.
|
|
|
Post by sixshot on Jul 31, 2022 11:56:46 GMT -5
That sure beats using the old nut cracker!
Dick
|
|
|
Post by bigbore5 on Jul 31, 2022 21:55:55 GMT -5
I have loaded from a Rockchucker since the 70's. Just got my first progressive a few weeks ago. Pro 1000. Love it so far.
Sounds like I need to avoid Dillon if blue is that addictive!
|
|
Fowler
.401 Bobcat
Posts: 3,559
|
Post by Fowler on Aug 1, 2022 0:18:12 GMT -5
Setting up one for 45acp with a small primer is a bit much. Toss those cases in the trash!
|
|