|
Post by warhawk on Jan 19, 2018 13:50:35 GMT -5
|
|
ziptar
.240 Incinerator
Posts: 19
|
Post by ziptar on Jan 19, 2018 14:17:06 GMT -5
The case hardened 45 Colt Carbine just made my want list. Might even bumped the the brass cabinet down a notch.
|
|
cmh
.401 Bobcat
Posts: 3,745
|
Post by cmh on Jan 19, 2018 21:24:31 GMT -5
They just sold a .44 😉 finally a lever gun in the right twist.
|
|
jgt
.327 Meteor
Enter your message here...
Posts: 782
|
Post by jgt on Jan 20, 2018 8:02:32 GMT -5
Did I miss something or is there only one version of the 44 magnum rifle listed above with a 1:16 twist rate (the 20")? It looks like the 16" version is still listed as 1:38 twist in the specifications. If so, there could be a lot of disappointed customers if they are not well informed of a situation like that.
|
|
cmh
.401 Bobcat
Posts: 3,745
|
Post by cmh on Jan 20, 2018 9:06:43 GMT -5
Hadnt noticed that one but already had a friend giving me the nod to the 20" model.... good catch on your part.
|
|
|
Post by warhawk on Jan 20, 2018 20:03:09 GMT -5
Hard to believe, but that’s what the spec sheet says, 1:16 twist only on the 20 incher.
But when I talked to the folks at Henry a couple of months ago, I got the impression that the faster twist barrel was be be phased in across all the 44 rifles (it started with the new Henry single shot).
|
|
jgt
.327 Meteor
Enter your message here...
Posts: 782
|
Post by jgt on Jan 21, 2018 10:43:10 GMT -5
It is probably a catalogue mistake. I went to their site and They had the 20" model listed as 1:16 twist and the 16" as 1:38. Now days you have to check everything to get what you are ordering. So just be aware this is the case.
|
|
|
Post by crazycarl on Jan 21, 2018 18:59:51 GMT -5
I love my Henry .41 carbine. Would love to see them offer that CCH edition in .41 tho, as that 20" rifle would make a fine addition to my slowly growing .41 stable.
|
|
eskimo36
.375 Atomic
Oklahoma
Posts: 2,049
Member is Online
|
Post by eskimo36 on Jan 22, 2018 7:00:34 GMT -5
Is Bobby Tyler doing the CCH for Henry on their rifles? It looks like his work.
|
|
|
Post by magnumwheelman on Jan 22, 2018 8:23:37 GMT -5
I'd be in for one in 32 / 327 but looks like those are excluded for now???
|
|
|
Post by warhawk on Jan 24, 2018 22:26:45 GMT -5
I saw over on the cast bullets site that a customer service rep confirmed it’s a misprint, actual specs are the same ole 1:38 twist everything else has.
I think I’m going to rebarrel my Browning 44 instead, maybe add a flip up sight.
|
|
|
Post by cbailey on Jan 26, 2018 21:42:49 GMT -5
Is there any way to get the regular size lever on their carbines instead of the oversized lever? I'm not a fan of the aesthetics of the bigger levers...
|
|
jdoc
.327 Meteor
Posts: 727
|
Post by jdoc on Jan 26, 2018 21:56:19 GMT -5
I concur with magnumwheelman and cbailey. CCH and standard lever on the 327 Federal chamberings.
|
|
|
Post by bushog on Jan 27, 2018 0:07:05 GMT -5
Is Bobby Tyler doing the CCH for Henry on their rifles? It looks like his work. I know he's been busy....
|
|
jdoc
.327 Meteor
Posts: 727
|
Post by jdoc on Jan 27, 2018 9:42:12 GMT -5
Is Bobby Tyler doing the CCH for Henry on their rifles? It looks like his work. I know he's been busy.... While you are at it. Who is doing Colt's case color?
|
|