gjn
.30 Stingray
Posts: 491
|
Post by gjn on May 14, 2011 20:42:19 GMT -5
Could a 45 ACP Ruger Blackhawk cylinder be rechambered to 45 Win. Mag. ? Thanks.
|
|
rigby
.327 Meteor
Posts: 769
|
Post by rigby on May 15, 2011 8:20:31 GMT -5
Without looking at my book I think the are dimensionally the same except for length so I would think so. Problem is the 45WM runs about 6000 cup higher then the 45 Colt Ruger only loads.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 15, 2011 10:37:49 GMT -5
As Rigby said you'll be limited to 30,000 PSI. Might as well stick with the 45 Colt at that point.
|
|
|
|
Post by cherokee on May 15, 2011 18:30:15 GMT -5
I have a 45 Colt conv that someone converted the ACP cylinder to 45 WM so I know it can be done - but I would not use it unless I had a supply of 45 WM brass to load with lighter loads. I would not make the conversion if it were I.
|
|
robl
.375 Atomic
These were the good ole days!
Posts: 1,415
|
Post by robl on May 16, 2011 11:45:36 GMT -5
You can make loads for the 45 Colt that will do everything that is needed with a pistol...
and shoot relatively cheap and plentiful 45 ACPs out of the other cylinder...
If you need more power have a 5 shot 45 Colt made.
|
|
|
|
Post by Lee Martin on May 16, 2011 11:53:25 GMT -5
Plus the 45 Win Mag is rimless, so crimping can be problematic (it headspaces off the mouth). As others have suggested, stick with the Colt for heavy stuff and the ACP for cheap plinking. -Lee www.singleactions.com |
|
gjn
.30 Stingray
Posts: 491
|
Post by gjn on May 16, 2011 12:49:49 GMT -5
Appreciate the responses. I have quite a supply of 45 Win.Mag brass but have a cylinder for my Freedom Arms in tht caliber so I'll stick with that and leave the 45 ACP cylinder as is.
|
|
robl
.375 Atomic
These were the good ole days!
Posts: 1,415
|
Post by robl on May 16, 2011 13:09:48 GMT -5
I was wondering if you had a pile of brass...
|
|
gjn
.30 Stingray
Posts: 491
|
Post by gjn on May 16, 2011 16:18:40 GMT -5
A number of years ago one of the distributors was closing it out and I bought a case of something like 4,500 pieces for around $300.00 and change. I've used it in the Contender and the Freedom Arms and found it to be an impressive round. Doesn't do anything a number of other rounds can't do but its something different.
|
|
|
|
Post by Lee Martin on May 16, 2011 16:26:19 GMT -5
Sporting Arms Inc. was the first to chamber the 45 Win Mag in a revolver. This one is from 1981:  -Lee www.singleactions.com |
|
|
|
Post by sixshooter on May 16, 2011 19:08:33 GMT -5
Speaking of 45 Win what ever happened to the Wildey auto?
|
|
gjn
.30 Stingray
Posts: 491
|
Post by gjn on May 17, 2011 15:27:33 GMT -5
Very nice Lee, thats a beauty!!
|
|
RpR
.30 Stingray
Posts: 196
|
Post by RpR on May 18, 2011 12:42:56 GMT -5
Speaking of 45 Win what ever happened to the Wildey auto? Went belly-up about a year ago. |
|
|
|
Post by Lee Martin on May 18, 2011 13:33:03 GMT -5
|
|
dmize
.401 Bobcat
Posts: 2,825
|
Post by dmize on May 18, 2011 15:37:02 GMT -5
Holy Moses!!!
Looks like I wont be owning one of those either.
|
|
