|
|
Post by AxeHandle on Dec 13, 2010 20:55:21 GMT -5
Stuck a chamber reamer in the chamber of my 10mm DW CBOB.. Minimum SAAMI spec reamer won't go. Explains a lot. Need to take the barrel, reamer, T handle, and a little cutting oil to the shop...
|
|
|
|
Post by serialsolver on Dec 14, 2010 8:56:51 GMT -5
axe, is it not feeding rounds?
|
|
|
|
Post by AxeHandle on Dec 14, 2010 9:47:45 GMT -5
They feed good from the magazine, under the extractor, and most of the way into the chamber.... Just can't jam them all the way in.
|
|
|
|
Post by serialsolver on Dec 14, 2010 12:08:15 GMT -5
you sure it's not 40s&w. ;D
|
|
|
|
Post by AxeHandle on Dec 14, 2010 12:33:37 GMT -5
 That would answer some questions wouldn't it? 
|
|
|
|
Post by serialsolver on Dec 14, 2010 13:01:47 GMT -5
Why don't you send it to me. I'll throughly test it and let you know what it is.  |
|
|
|
Post by AxeHandle on Dec 15, 2010 12:12:44 GMT -5
Chamber clean up was very quick and easy. Only took a $65 reamer to fix it.. Considering what I paid for the CBOB and the current price of a DW.... Money well spent..
|
|
|
|
Post by serialsolver on Dec 17, 2010 9:08:44 GMT -5
Axe, the bubba fix would have been to just shoot 40s&w in it till it got enough wear in it to chamber them hotter 10mm’s. ;D while I’m thinkin on it how bout sendin that chamber reamer to me so I can bubba fix on my glock 22 so I can shoot them hotter 10mm’s in it.
|
|
|
|
Post by AxeHandle on Dec 17, 2010 12:20:50 GMT -5
Try the Bubba "sandpaper on a dowel rod method" I hear it works pretty good..  |
|
|
|
Post by serialsolver on Dec 17, 2010 16:46:46 GMT -5
;D ;D ;D
|
|
|
|
Post by smirker on Dec 20, 2010 14:39:06 GMT -5
Interesting,I have a .45ACP Bobtail that had same problem.Would not chamber anything but Golden Sabre.Bumped chamber with a reamer and adjusted extractor tension.Super gun with great parts,but a specs. a little on the tight side.
|
|
|
|
Post by AxeHandle on Dec 21, 2010 8:13:35 GMT -5
I've seen it with custom chambered bullseye 45s. I traded for a Forest Davis built wadcutter gun 30+ years ago that was just to finicky. Got the All NG armorer to check it out. He ran a finish reamer into the chamber and all was well. Posted in the DW thread on the 1911 forum and didn't get any quick confessions. I'm betting that DW got some under spec reamers at some point it time that were quickly replaced. I'd have sent my CBOB home to be fixed but a finish reamer cost about what it would cost to return it and I get to keep the reamer. ;D
|
|
That would answer some questions wouldn't it? 
