Dave Clements 357 Mag Redhawk

[jensonev]

There's a Dave Clements 4" Redhawk 6-shot 357 Magnum over on GB as of the time of this post.
I bring it up partly because I've seen the listing lapse a few times so its price would probably the starting bid for someone who wanted it, but it also comes with an additional cylinder if someone wanted a convertable project. A 356GNR would be just about right for that second one. What would you do with it?

[sixguntech]

My vote was “Something Else”, I would probably send that cylinder off to be chambered for the 360 DW. Steve

[tj3006]

360 Dan Wesson.
I assume there is enough room in the window to fit a 360 Cylinder.
Rw would probably know.
...tj

[bula]

Thinking OP meant to use the extra cylinder that comes with the gun. 

[45MAN]

I HAD A 357 REDHAWK THAT HAD BEEN PUNCHED OUT TO 360 DW. PER THE GUY I GOT IT FROM IT WORKED GREAT BUT YOU HAD TRIM THE BRASS A wee bit IF YOU WANTED TO SEAT THE DUAL CANNELURED 180gr XTP LONG, i.e. ON THE BOTTOM CANNELURE. THAT GUN IS NOW ON A JRH BENCH WAITING TO BE CONVERTED TO 45 COLT (TRAPR OWNS THE GUN).

[bigbore5]

360DW vote here too

[AxeHandle]

356GNR here. What is there not to like? Off the shelf dies, published loading data, 41 Mag brass... People like the current 8 shot RH but... This 6 shot Clements 357 is the cats meow without the extra cylinder.
www.gunbroker.com/item/1067494241

Embedded in this page:
www.reedercustomguns.com/information/gnr_cartridges.htm

You will read:
"This one is our 356 GNR and is a 41 Magnum case necked down to 357. (note standard 357 for comparison) It is intended for revolvers but works well in Contenders also. It will put a 125 gr. bullet out at 2200 fps. Best when rechambered from 357 Mag Blackhawks, Redhawks, or S&W Model 27 or 28. Also available in our SKORPION revolver."