|
|
Post by boatswainsmate on Jul 14, 2024 15:58:57 GMT -5
Hello All, New to me NEI 429-310. There weighing 315 grains in my alloy and coming out the mold at .434. Thanks for looking and any comments. Boats  |
|
|
|
Post by 41freak on Jul 14, 2024 16:05:28 GMT -5
Look great, nice big flatpoint. I will be watching for a range report.
|
|
|
|
Post by bula on Jul 14, 2024 18:13:56 GMT -5
Mooseasuars beware..
|
|
cheth
.240 Incinerator
Posts: 62
|
Post by cheth on Jul 14, 2024 18:16:41 GMT -5
I saw that one or perhaps a similar one on ebay recently.
|
|
|
|
Post by x101airborne on Jul 14, 2024 18:29:32 GMT -5
Looking good! Great fillout and good bases. Should be a real thumper!
|
|
|
|
Post by boatswainsmate on Jul 14, 2024 18:45:07 GMT -5
I saw that one or perhaps a similar one on ebay recently. You are correct. I won it on Ebay. |
|
nicholst55
.375 Atomic
Retired, twice.
Posts: 1,142
|
Post by nicholst55 on Jul 14, 2024 20:19:40 GMT -5
Those should strike with some authority!
|
|
|
|
Post by bigbore5 on Jul 14, 2024 20:33:55 GMT -5
Nice looking bullet. Now let us know how it works on meat.
|
|
Ramar
.30 Stingray
Posts: 442
|
Post by Ramar on Jul 15, 2024 6:06:32 GMT -5
You could write a book on bullet casting, Boats. Those are nice!
|
|
|
|
Post by bula on Jul 15, 2024 9:29:46 GMT -5
What Ramar said !
|
|
|
|
Post by northerngos on Jul 15, 2024 22:08:58 GMT -5
Those are gorgeous. Can’t wait to hear how they shoot!
|
|
|
|
Post by northerngos on Jul 15, 2024 22:09:22 GMT -5
What’s crimp to nose length?
|
|
|
|
Post by blackmamba on Jul 16, 2024 8:47:36 GMT -5
Nice Hammers, Boats, a little H110 'll do ya!
|
|
jeffh
.375 Atomic
Posts: 1,749
|
Post by jeffh on Jul 16, 2024 21:37:08 GMT -5
NICE work, man!
I've been casting for a long time, have seen a LOT of others' cast work. You do nice work with a mould and a pot o' molten alloy, Sir.
Don't have a use for a bullet like that myself, but I just wanted to compliment you on a really nice job casting.
|
|
|
|
Post by reflex264 on Jul 17, 2024 7:35:18 GMT -5
Look great. Good mold fill and clean edges. What is your alloy?
|
|
