|
|
Post by Encore64 on Jun 28, 2024 17:14:57 GMT -5
Somehow, I never knew Kelye made Uberti #5 Base Pins. But, recently he messaged me that he was sending one to try in my small frame 38 Special.
Elated when it arrived, I messaged him to see if more were available.
He had plenty for my small frame guns (22 LR/Mag, 32-20/32 Mag and 38 Special). But, only four for the full size guns. Two less than I needed, but four more than I had. I could ask no more.
They arrived today and all have been installed.
My 44-40 and 45 Colt Flattop Targets were the first to get them. Even with the Black Powder Frames, the pins were a perfect fit.
The remaining two went to my Callahan 44-40/44 Mag and Bad Boy 10mm/38-40.
Fantastic upgrades to Fantastic Guns.
|
|
|
|
Post by patdaddy on Jun 28, 2024 18:21:46 GMT -5
i have one of his locking #5 pins in a Jaeger Bisley clone. I hated the factory safety base pin, and the colt-style pin i replaced it with was jumping with recoil. I also have his pins in i think 5 other single actions.
|
|
kelye
.30 Stingray
www.beltmountain.com
Posts: 379
|
Post by kelye on Jun 29, 2024 8:54:36 GMT -5
Huey, I have more of these that can be re-notched and shortened for the Uberti guns. Kelye
|
|
|
|
Post by Encore64 on Jun 29, 2024 9:50:52 GMT -5
Huey, I have more of these that can be re-notched and shortened for the Uberti guns. Kelye Message Sent... |
|
|
|
Post by dougader on Jun 30, 2024 6:50:08 GMT -5
Pics of the new #5 base pins installed in your Uberti revolvers would be awesome.  |
|
|
|
Post by Encore64 on Jun 30, 2024 16:44:07 GMT -5
I'll definitely be doing a thread on these guns.
|
|
|
|
Post by Encore64 on Jul 5, 2024 20:23:31 GMT -5
Well, as usual, Kelye delivers. Three more Uberti #5 Base Pins arrived today. All my Ubertis properly outfitted before Kelye took down his shingle!!!
|
|
|
|
Post by lscg on Jul 5, 2024 21:52:10 GMT -5
They really are awesome! Kelye made me one several years back for my Cimmaron arms model P jr.
|
|
|
|
Post by mike454 on Jul 6, 2024 4:45:45 GMT -5
Picture of one in a USFA  |
|
|
|
Post by longoval on Jul 9, 2024 14:38:46 GMT -5
Do I ever get tired of seeing that one?
No, no I do not.
|
|
|
|
Post by Jamey Worrell on Jul 9, 2024 16:16:03 GMT -5
Huey, I have more of these that can be re-notched and shortened for the Uberti guns. Kelye Any for the smaller framed Lightnings in 38 special? |
|
|
|
Post by Encore64 on Jul 9, 2024 16:23:45 GMT -5
Huey, I have more of these that can be re-notched and shortened for the Uberti guns. Kelye Any for the smaller framed Lightnings in 38 special? I believe Kelye has (or had) some for the small Ubertis. He sent me three of them for my 38 Special, 32-20 said 22 LR/Mag... |
|
kelye
.30 Stingray
www.beltmountain.com
Posts: 379
|
Post by kelye on Jul 9, 2024 17:13:28 GMT -5
Yes, I have some for the small frame.
|
|
|
|
Post by Encore64 on Jul 9, 2024 18:07:05 GMT -5
Get these while you can. This is one of products that will be infinitely sought after.
|
|
|
|
Post by lionhound on Jul 23, 2024 20:59:58 GMT -5
Thanks to this thread, I ordered a Belt Mountain #5 base pin for my Uberti .22 Stallion. I'm not sure how to post photos, but Kelte's product far surpasses the factory part and cured a couple of issues. I took it to the range today and now a nice revolver is better than when it left Italy.
Thanks Kelye!
|
|
