|
Post by cddogfan1 on Mar 28, 2024 7:59:34 GMT -5
If you are looking its worth a call. Just ordered one for my Smith and Wesson 69. Asked about Ruger Flattop he said he was out but give him a couple months and they would be back in stock. Said he had others in stock though and to call and ask for what you want and he would check.
|
|
|
Post by paul105 on Mar 28, 2024 11:52:35 GMT -5
Noticeable improvement over factory for me. Here's one on my M69 combined with Dawson 1/10" front. Paul
|
|
|
Post by cddogfan1 on Mar 28, 2024 13:24:30 GMT -5
Noticeable improvement over factory for me. Here's one on my M69 combined with Dawson 1/10" front. Paul Paul I looked through your 69 thread for the info but could not find it. What height are you running on the Dawson front sight with the Bowen rear.
|
|
|
Post by paul105 on Mar 28, 2024 14:09:29 GMT -5
I'll see what info I have in a little bit.
|
|
|
Post by paul105 on Mar 28, 2024 15:52:40 GMT -5
I measured the Bowen rear .370" and the Dawson Front .315" This is on the 2.75" gun
I can't remember what load this gun is sighted in for - sorry, not much help
|
|
davt
.240 Incinerator
Posts: 22
|
Post by davt on Mar 29, 2024 17:02:18 GMT -5
thanks for posting this. I called today and a Rough Country is on the way for my super lucky custom 686 4". I call it super lucky custom as I was at the local gun shop and saw it. The cylinder locks up as tight as a Freedom Arms (I have had 5), the single action pull is 3 lbs, the double is 7.5 lbs and cylinder gap remains at 0.003 and is perfectly square. All this after about 500 full power .357 mag round. Someone did good at the factory. The new Bowen sight will be nice.
|
|
|
Post by wyomingnimrod on Apr 15, 2024 21:33:01 GMT -5
I called today snd spoke to Hamilton who referred me to Jeremy and it sounds like I’ll be getting a Rough Country rear coming for my .44 Magnum Mountain Gun. Yeehaw. Thanks for posting here otherwise I wouldn’t have thought to call and ask.
|
|
|
Post by 45MAN on Apr 16, 2024 7:32:41 GMT -5
DEALT WITH JEREMY YESTERDAY (4/15/24), GETTING A ROUGH COUNTRY W/O FOR MY 625-6 4" 45 COLT MOUNTAIN GUN. HE SAID, AS PER THE S&W CHART, THAT GUN CAME WITH A NON-STANDARD XTRA LOW RS BLADE, LOWER THAN WHAT BCA HAS SO HE WAS GOING TO SEND ME THE LOWEST THEY HAVE. MY MOUNTAIN GUN IS A GREAT SHOOTING REVOLVER, HOPING THIS WILL BE A POSITIVE ADDITION FOR BETTER SHOOTING.
|
|