|
|
Post by x101airborne on Feb 25, 2024 8:47:22 GMT -5
Beware Trey!!! I've posted that for years and have been BBQ'd for posting Blasphemy!!! I posted mine were as accurate as my FA and was blasted. By guys who are clueless, but that's the norm... Darn, now you got me thinking about BBQ! I know this is my one and only example by Uberti, but folks blasting them better have one they can refer to personally. |
|
|
|
Post by bigbore5 on Feb 25, 2024 8:49:17 GMT -5
More expensive doesn't always meen it's more accurate. I've even had a Rohm 38 that would group wadcutters touching at 25yds. True it was about 2 feet off to the left, but a good group is a good group,right?
|
|
|
|
Post by x101airborne on Feb 25, 2024 8:56:17 GMT -5
Yessir. I can figure out where the group goes and adjust from there. Not getting a group at all tells you nothing except something isn't right. Then it is up to the individual to sort out what part of the symphony isn't in time.
|
|
|
|
Post by Encore64 on Feb 25, 2024 9:19:51 GMT -5
My only complaint with Uberti is that they don't build more adjustable sight revolvers.
I'd buy a Callahan or Bad Boy in any caliber they built them in...
|
|
|
|
Post by bigbore5 on Feb 25, 2024 10:12:37 GMT -5
A Callahan 480 sure would be a seller.
|
|
|
|
Post by Encore64 on Feb 25, 2024 10:22:31 GMT -5
I'd actually prefer to see 32-20, 38 Special, 38-40/10mm, 44-40 (Auxiliary Cylinder in 44 Mag) and 45 Colt/ACP...
|
|
|
|
Post by bigbore5 on Feb 25, 2024 14:16:28 GMT -5
I'd actually prefer to see 32-20, 38 Special, 38-40/10mm, 44-40 (Auxiliary Cylinder in 44 Mag) and 45 Colt/ACP... For the 32's and 38sp I would like to see an adjustable sight P jr. A mini-Callahan |
|
|
|
Post by hounddogman on Feb 25, 2024 14:21:28 GMT -5
I need another 357 like I need another hole in my head but I would be very tempted by a bad boy so chambered.
|
|
|
|
Post by Encore64 on Feb 25, 2024 14:45:00 GMT -5
I'd actually prefer to see 32-20, 38 Special, 38-40/10mm, 44-40 (Auxiliary Cylinder in 44 Mag) and 45 Colt/ACP... For the 32's and 38sp I would like to see an adjustable sight P jr. A mini-Callahan They made the P Jr Adjustable Sight Models in 38 Special. Proud to say I have the 5 1/2" Model. Also, the 22 LR/Mag in 6 1/2". Like you I wish they still offered them along with the 32-20... |
|
|
|
Post by x101airborne on Feb 25, 2024 17:24:13 GMT -5
For the 32's and 38sp I would like to see an adjustable sight P jr. A mini-Callahan They made the P Jr Adjustable Sight Models in 38 Special. Proud to say I have the 5 1/2" Model. Also, the 22 LR/Mag in 6 1/2". Like you I wish they still offered them along with the 32-20... That 38 spl. would be the bees knees!! |
|
|
|
Post by x101airborne on Mar 2, 2024 8:42:12 GMT -5
I noticed the other day that my Bad Boy has two screw holes with plugs in them in front of the rear sight, right where the barrel threads into the frame. Are these for a sight base? I couldn't think of any other reason to have them.
|
|
|
|
Post by hounddogman on Mar 2, 2024 11:16:53 GMT -5
I noticed the other day that my Bad Boy has two screw holes with plugs in them in front of the rear sight, right where the barrel threads into the frame. Are these for a sight base? I couldn't think of any other reason to have them. Yep . www.cimarron-firearms.com/picattiny-rail-for-bad-boy.html |
|
|
|
Post by Encore64 on Mar 2, 2024 12:26:10 GMT -5
|
|
|
|
Post by x101airborne on Mar 2, 2024 19:35:01 GMT -5
Thank yall. Got one ordered just for grins.
|
|
|
|
Post by elguapo on Mar 2, 2024 20:24:12 GMT -5
Thank ya'll for the reviews. I like all things quality single-action and particularly .44 magnum. I've got one of these on my list of guns to pick up at some point. It seems like really nice setup. I've purchased four new Ubertis over the last several months. They all have shot well and been of good quality. About the only negative I've heard is evidently the cylinder may be a little shorter than a Blackhawk. I'm wondering if a 429421 will be too long for these if seated in the crimp groove
|
|
