|
|
Post by BigBORR on Feb 18, 2024 19:11:16 GMT -5
I want to load some .357's with Hi-Tek coating from Missouri Bullet Company. Is it ok to load these with H110? Am I correct that they don't require a gas check if they are coated? Also, would powder amount be the same as 158gr jacketed bullet? A lot of questions, I know.
|
|
|
|
Post by potatojudge on Feb 18, 2024 20:47:50 GMT -5
I think you use cast bullet data for powder coated bullets, and AFAIK they'll do fine with H110 so long as they're sized properly for the gun.
|
|
|
|
Post by bigbore5 on Feb 18, 2024 21:37:17 GMT -5
I shoot hi tek coated bullets in the 357mag using regular data for the bullet or equivalent jacketed data with no trouble
|
|
|
|
Post by BigBORR on Feb 18, 2024 22:52:34 GMT -5
I shoot hi tek coated bullets in the 357mag using regular data for the bullet or equivalent jacketed data with no trouble Thanks, I thought it would be ok but needed some assurance. |
|
gnappi
.375 Atomic
Posts: 1,609
|
Post by gnappi on Feb 18, 2024 23:10:20 GMT -5
For all of my coated bullets I use jacketed data.
|
|
