|
|
Post by 500fksjr on Jan 15, 2024 20:41:53 GMT -5
Anyone shooting one or have past experience with one? I have a Razor back and love it...
|
|
gnappi
.375 Atomic
Posts: 1,610
|
Post by gnappi on Jan 15, 2024 22:44:13 GMT -5
Anyone shooting one or have past experience with one? I have a Razor back and love it... I have three longslides in 10mm a Bruin, Tanfoglio hunter and Kimber. The Bruin is accurate, and stays tight. I added aluminum grips to offset the nose heavy feel.  |
|
markwell
.30 Stingray
Firearms resale value should be your children's problem
Posts: 354
|
Post by markwell on Jan 16, 2024 16:50:13 GMT -5
My son has a Bruin he uses for following the hounds chasing bears here in the Alleghenies. We load a 200gr hard cast RNFGC at 1260 fps for bears and it does a very good job. The Bruin has held up well and the only thing we did to it was change out the stocks and put on a MS housing with a lanyard loop on it.
WE have a few other DWs and they are all very nice 1911s for the money.
|
|
|
|
Post by Longhunter1750 on Jan 18, 2024 21:02:10 GMT -5
I have the Kodiak and love it. I believe the only difference would be that the Kodiak has a bull barrel.
|
|
|
|
Post by cas on Jan 19, 2024 0:03:43 GMT -5
Bruin's have a "Tri-topped" slide and some(?) of them have the tapper at the bottom.
|
|
|
|
Post by revolvercranker on Jan 19, 2024 11:37:13 GMT -5
Does the Bruin have the feed ramped barrels? I have an Iver Johnson Eagle Longslide 10mm. Pretty satisfied with it except I wished it had the barrel feed ramp to insure a little more protection for case web blow out. Workmanship on it is really great and it was as tight as a buck's ass stretched over a barrel and after shooting the hell out of it, it's still tight. Now what we're talkinga about, but I have a stainless Glock long slide in 10mm. No flys on it what so ever.
|
|
|
|
Post by 500fksjr on Jan 19, 2024 15:41:52 GMT -5
Bruin's have a "Tri-topped" slide and some(?) of them have the tapper at the bottom. Not sure what your referring?? Could you be a bit more specfic...Thanks |
|
|
|
Post by revolvercranker on Jan 19, 2024 22:35:36 GMT -5
This is an example of a Tri topped slide. It's done to reduce weight in the reciprocating mass..  |
|
|
|
Post by cas on Jan 20, 2024 0:03:16 GMT -5
|
|
|
|
Post by 500fksjr on Jan 20, 2024 0:13:28 GMT -5
Thank You!
|
|
markwell
.30 Stingray
Firearms resale value should be your children's problem
Posts: 354
|
Post by markwell on Jan 24, 2024 13:04:29 GMT -5
The bottom gun is referred to a the “slant nosed “version.
|
|
gnappi
.375 Atomic
Posts: 1,610
|
Post by gnappi on Jan 28, 2024 23:28:35 GMT -5
Does the Bruin have the feed ramped barrels? I have an Iver Johnson Eagle Longslide 10mm. Pretty satisfied with it except I wished it had the barrel feed ramp to insure a little more protection for case web blow out. Workmanship on it is really great and it was as tight as a buck's ass stretched over a barrel and after shooting the hell out of it, it's still tight. Now what we're talkinga about, but I have a stainless Glock long slide in 10mm. No flys on it what so ever. AFAIK the only 1911 style 10's with the old Colt style ramp less barrel is the Colt Delta and the Iver. Also the Bruin has a steel frame to answer a PM sent me which others may be interested in knowing. |
|
