|
|
Post by 500fksjr on Jan 8, 2024 22:20:55 GMT -5
Picked some up today since I could not find any Unique...Anyone using it in 32 H&R/115 grn lead,327mag 100grn xtp, 38 spec 160swc-gc,357 mag 125 grn xtp or 160 grn swc-gc or 10 mm 180 xtp or 200 grn powder coated ...Thanks for imput.
|
|
|
|
Post by Randominator on Jan 9, 2024 6:12:39 GMT -5
I've used Power Pistol with 9mm, 10mm and 40 S & W.
10mm with a 230 grain powder coated hard cast. 5.9 grains for 975 fps.
|
|
|
|
Post by bigbore5 on Jan 9, 2024 7:42:22 GMT -5
32H&R 98gr swc on 5gr power pistol for 1235fps out of a 9-1/2" single six. Groups 1-1/8" at 25yds, but would probably be tighter with a scope.
|
|
|
|
Post by wendigo on Jan 9, 2024 18:37:13 GMT -5
I've been using it in standard pressure .38 Special, 155-158 swc's with 5.4 grains, good accuracy. Turn 'em up into +P territory and the speeds are impressive too.
I realize you didn't ask, but 7 grains in 45ACP with the HG68 style SWC gives 950 with an ES of 5. Used it in a steel match last weekend and was the second highest placing iron sight shooter (9mm optics guys are everywhere now), so yeah, accurate and fast - for a 45 anyhow.
|
|
|
|
Post by z1r on Jan 9, 2024 19:08:18 GMT -5
In my .32 H&R's I run between 4.5 to 5.0 grains of PP under various 115 Cast bullets. Do a search for Brian Pearce's .32 H&R Handloads, good stuff!
I run PP in my 9mm and .44 special as well.
|
|
|
|
Post by bigbore5 on Jan 9, 2024 23:07:33 GMT -5
Also like 8.5gr power pistol under a RCBS 38-150kt (157gr) for 1250fs from the 6" Security Six. 1-3/4" at 25yds off-hand.
|
|
|
|
Post by z1r on Jan 10, 2024 11:43:20 GMT -5
My latest effort with PP will be in the .30 Carbine, I have a Saeco #630 136 grain FN that I'll be seating over the charge. In theory this bullet is short enough to stabilize with the Blackhawk's sedate twist rate. I'll let y'all know. I'm so tempted to replace that barrel with a 10" twist.
|
|
