|
|
Post by eagle1899 on Dec 17, 2023 11:55:06 GMT -5
|
|
|
|
Post by x101airborne on Dec 17, 2023 17:02:50 GMT -5
Should be a fine bullet choice but some flat nose designs have feeding troubles in carbines. If you can buy some bullets to try first might be wise to give it a go first.
|
|
|
|
Post by bigbore5 on Dec 17, 2023 17:06:22 GMT -5
That bullet is great but many of the MP carbine bullets have a long driving band that is not revolver friendly.
I suggest you look at the 640 design. It's excellent.
|
|
|
|
Post by eagle1899 on Dec 17, 2023 22:16:35 GMT -5
Thank you both for the insight.
Does the 640 design have sufficient lube groove capacity for a 20" barrel or am I concerned needlessly?
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Dec 17, 2023 22:21:22 GMT -5
My revolvers never shot the 45 carbine bullet as accurately as many other bullets I cast. My favorite for all 45 colts is the mp 454 270saa. It was purpose designed to fill colt saa cylinder lengths. A lot of good load data is available.
The carbine bullet has mega wide meplat. To be honest it never ran well in my marlin 1894. I dont know what lever gun it was made for, but it wasnt mine.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Dec 17, 2023 22:22:54 GMT -5
Thank you both for the insight. Does the 640 design have sufficient lube groove capacity for a 20" barrel or am I concerned needlessly? 640 is too long for your cylinder and probably not reliable feeding in your rifle. Its long length. Its a fine bullet but just made for longer cylinders. |
|
|
|
Post by firesubie on Dec 17, 2023 22:28:23 GMT -5
The MP 45-270 SAA feeds great and are accurate in my Rossi R92's. My .45 Colt cast bullets are all powder-coated and sized at .454 with no leading.
|
|
|
|
Post by bigbore5 on Dec 17, 2023 22:35:33 GMT -5
Thank you both for the insight. Does the 640 design have sufficient lube groove capacity for a 20" barrel or am I concerned needlessly? Needlessly. It works fine with 50/50 in my 24" loaded +p. But I didn't think about the short SAA cylinder. I only have Rugers. |
|
gregs
.327 Meteor
Posts: 530 
|
Post by gregs on Dec 18, 2023 7:46:22 GMT -5
Got the 275 carbine mold for my Winouko 92 but haven't got it hot yet. Had good luck with a 270 SSA AND A 454424 IN A 94AE Trapper, but sent it down the road when I came upon an 92 Trapper take down.
That mold was designed for the lever action carbines so it should be a good one.
Do a search over on castboolits to see the results of the group buy.
|
|
|
|
Post by boatswainsmate on Dec 18, 2023 15:19:31 GMT -5
|
|
|
|
Post by eagle1899 on Dec 19, 2023 13:25:40 GMT -5
Thanks everyone. The 270 SAA looks like the winner.
|
|
