|
|
Post by AxeHandle on Sept 24, 2023 15:09:14 GMT -5
Dang Fusion 1911 looked and felt so good...  |
|
|
|
Post by AxeHandle on Sept 24, 2023 15:10:15 GMT -5
Added Dawson sights and played with it a bit.
|
|
|
|
Post by AxeHandle on Sept 24, 2023 15:11:35 GMT -5
Didn't realize how bad it shot until I pulled out my Stainless LW Kimber 9mm. Planning a barrel upgrade now...  |
|
|
|
Post by AxeHandle on Sept 24, 2023 15:16:31 GMT -5
Thinking I'll strap the little beast into the Ransom Rest to quantify the improvement. kartbarrel.com/ |
|
gnappi
.375 Atomic
Posts: 1,394
|
Post by gnappi on Sept 24, 2023 16:12:35 GMT -5
That looks like a New York Fusion? Ramped barrel or not?
|
|
|
|
Post by AxeHandle on Sept 24, 2023 16:25:58 GMT -5
Barrel is NOT ramped... Frame is marked Florida.
|
|
|
|
Post by Quick Draw McGraw on Sept 24, 2023 17:51:27 GMT -5
I have heard e d mixed things about Fusion. Never handled one so no personal experience. I hope a new barrel helps the accuracy.
|
|
|
|
Post by harold89 on Sept 24, 2023 20:18:44 GMT -5
Bummer, I’ve handled a few and they looked nice. New barrel fitted well should cure.
|
|
gnappi
.375 Atomic
Posts: 1,394
|
Post by gnappi on Sept 25, 2023 6:12:49 GMT -5
Barrel is NOT ramped... Frame is marked Florida. Looks good, they stopped using ramped frame / barrels when they moved to Florida. Mine is N.Y made in .40/.357 Sig.  |
|
gregs
.30 Stingray
Posts: 457 
|
Post by gregs on Nov 5, 2023 23:46:54 GMT -5
Slug the bore first. 9mm barrels run .355-.358.
|
|
|
|
Post by sixshot on Nov 6, 2023 2:48:31 GMT -5
This will be interesting, knowing Stan is an experienced shooter I'm sure he's already done all of the normal things to try & sort this out.
|
|
gnappi
.375 Atomic
Posts: 1,394
|
Post by gnappi on Nov 6, 2023 9:24:02 GMT -5
This will be interesting, knowing Stan is an experienced shooter I'm sure he's already done all of the normal things to try & sort this out. Some dogs just won't hunt :-) I'm not a one hole target shooter but in my experience I haven't found 1911's in 9mm to be particularly accurate, but depending on how bad it shoots if available I'd try another barrel,link and bushing, I think it's worth the trouble it to save it. |
|
|
|
Post by AxeHandle on Nov 6, 2023 10:32:46 GMT -5
This Fusion's fit and finish definitely shows evidence of the Dan Wesson roots. IMHO a ramped barrel is not needed in a steel frame 1911. Alloy frame yes. Steel frame no.. Accuracy wise a properly built 9mm will shoot. The trick from a bullseye prospective is they aren't used as centerfire guns because they must be loaded to the recoil level of a 45 wadcutter gun to be accurate. Unlike the 38 Super that can be loaded pretty light and be X ring accurate.. Loading to the recoil level of the 45 kills the 9mm advantage over the 45. A .451 45 ACP makes those close shots while the .355 9mm just doesn't quite get there.
Now the trick... Rebarrel is $700. Not just dropping in an EZ fit barrel and bushing but a proper barrel (KKM) and fitting by a nationally recognized bullseye pistol builder.
|
|
gnappi
.375 Atomic
Posts: 1,394
|
Post by gnappi on Nov 6, 2023 17:53:34 GMT -5
Axe, maybe I can offer another tack before going the $700 route? I have a brand new Colt barrel (removed to mod mine to a super) with a surprisingly tight bushing and link that you can goof around with replacing the link and bushing on which just may point out whether the bbl in the Fusion was just burnt out or poorly made?
You could send it back to me when you're done trying to debug your Fusion?
|
|
|
|
Post by AxeHandle on Nov 6, 2023 18:14:24 GMT -5
Thanks for the offer but if I go forward with this project if will be whole hog...
|
|
