|
|
Post by AxeHandle on Aug 23, 2023 7:28:32 GMT -5
My acquisition of the 9x25 barrel for a Glock G20 in turning into a fun search for loading data. Flipped through some older loading manuals last night. Haven't seen a thing yet...
|
|
gnappi
.375 Atomic
Posts: 1,611
|
Post by gnappi on Aug 23, 2023 14:24:55 GMT -5
The Lyman second Edition has 9x25 data which includes IPSC Major data with lead bullets up to 130 grains.
I have some data (not chronographed) for 139 and 149 gr PC'd bullets with Red Dot, AA5 and AA7 in my Remington R1 6" longslide, PM me if you want it.
|
|
|
|
Post by AxeHandle on Aug 23, 2023 15:57:34 GMT -5
Prompted me to go look through more loading manuals. Still did not see and 9x25 data. My Lyman book is the first edition. Sent a PM with an email addy and phone number.
|
|
|
|
Post by AxeHandle on Aug 23, 2023 16:13:53 GMT -5
Found Lyman #2 on Amazon....
|
|
gnappi
.375 Atomic
Posts: 1,611
|
Post by gnappi on Aug 23, 2023 18:49:26 GMT -5
I will send all u need 2nite.
|
|
|
|
Post by AxeHandle on Sept 3, 2023 17:43:37 GMT -5
Lyman #2 arrived today.... Copyright 1994...
|
|
|
|
Post by dougader on Sept 3, 2023 20:51:49 GMT -5
Mike McNett of DoubleTap ammo used to post a bunch of 9x25 loading data on the Glocktalk forum.
|
|
|
|
Post by ss30378 on Sept 6, 2023 10:15:09 GMT -5
I've got chrono data on everything from a 90g xtp to a 180g hardcast. AA9 and Bluedot are excellent performers in this cartridge.
|
|
|
|
Post by tonyrumore on Sept 11, 2023 15:59:07 GMT -5
I have some 9x25 data that I worked up in a 6" Tanfoglio Hunter. I'll dig it up when I'm back at my other shop.
I believe the 65gr Lehigh bullet flew 2550fps.
I have data for bullets up to the 147gr XTP as well.
Tony Rumore
Tromix
|
|
gnappi
.375 Atomic
Posts: 1,611
|
Post by gnappi on Sept 11, 2023 17:34:05 GMT -5
I have some 9x25 data that I worked up in a 6" Tanfoglio Hunter. I'll dig it up when I'm back at my other shop. I believe the 65gr Lehigh bullet flew 2550fps. I have data for bullets up to the 147gr XTP as well. Tony Rumore Tromix Tanfo Hunter? A rare bird that one is. Do you still have it? |
|
|
|
Post by tonyrumore on Sept 12, 2023 16:36:12 GMT -5
Yes, I still have the Tanfoglio Hunter. Most were in 10mm, but mine was originally 45 ACP since I run 40 Super most of the time. However, I found that by simply swapping to a 10mm extractor, it will cycle both 45 ACP case head sizes as well as 10mm cases so I just leave the 10mm extractor in place and swap the barrels around. For 9x25 and 40 Super, I use a 22+8 dual spring setup similar to a Detonics Scoremaster. Total spring weight, 30 pounds.
I have quite a few Tanfoglio barrels in various calibers and lengths. Tony Rumore Tromix    |
|
gnappi
.375 Atomic
Posts: 1,611
|
Post by gnappi on Sept 12, 2023 22:06:10 GMT -5
Yes, I still have the Tanfoglio Hunter. Most were in 10mm, but mine was originally 45 ACP since I run 40 Super most of the time. However, I found that by simply swapping to a 10mm extractor, it will cycle both 45 ACP case head sizes as well as 10mm cases so I just leave the 10mm extractor in place and swap the barrels around. For 9x25 and 40 Super, I use a 22+8 dual spring setup similar to a Detonics Scoremaster. Total spring weight, 30 pounds.
I have quite a few Tanfoglio barrels in various calibers and lengths. Tony Rumore Tromix Holy crap! I thought "I" was a Tanfo fan, but your collection is something else! I've never seen or heard of a 9x25 barrel for the Hunter. Did you have a 9mm bbl. chamber rebored? My Hunter was bought new with the factory slide lightened, later on I got the .40 upper for it. Tanfoglio has factory supplied race ready and carry options and they (IMO) took the CZ design to directions never dreamed of by CZ. I took full advantage of a few of them!  |
|
|
|
Post by tonyrumore on Sept 19, 2023 12:03:16 GMT -5
I have a 9x25 chamber reamer. I just punched out a 9mm barrel.
Tony
|
|
