|
|
Post by AxeHandle on Dec 8, 2022 14:02:35 GMT -5
This one could come to my house...  |
|
|
|
Post by AxeHandle on Dec 8, 2022 14:02:55 GMT -5
|
|
|
|
Post by AxeHandle on Dec 8, 2022 14:03:09 GMT -5
|
|
|
|
Post by AxeHandle on Dec 8, 2022 14:03:21 GMT -5
|
|
|
|
Post by AxeHandle on Dec 8, 2022 14:03:33 GMT -5
|
|
|
|
Post by AxeHandle on Dec 8, 2022 14:03:45 GMT -5
|
|
|
|
Post by AxeHandle on Dec 8, 2022 14:03:56 GMT -5
|
|
|
|
Post by AxeHandle on Dec 8, 2022 14:04:10 GMT -5
|
|
|
|
Post by AxeHandle on Dec 8, 2022 14:04:26 GMT -5
|
|
|
|
Post by AxeHandle on Dec 8, 2022 14:04:39 GMT -5
|
|
|
|
Post by AxeHandle on Dec 8, 2022 14:04:51 GMT -5
|
|
|
|
Post by AxeHandle on Dec 8, 2022 14:05:02 GMT -5
|
|
|
|
Post by AxeHandle on Dec 8, 2022 14:05:13 GMT -5
|
|
|
|
Post by bradshaw on Dec 8, 2022 14:23:20 GMT -5
Stan.... ain’t even gonna draw my 4-inch; your 629 looks more like 3-inches. Barrel looks shorter than my 4-inch, which S&W set back to remove barrel face/forcing cone erosion.
Were it mine, I’d strip clean and lube it, then try it with cast 240 SWC deep seated over 5.5/231 (or selfsame HP-38) in .44 Mag brass.
David Bradshaw
|
|
|
|
Post by AxeHandle on Dec 8, 2022 14:25:50 GMT -5
I was thinking it looked short myself... Guess I'd better measure.
|
|
