|
|
Post by AxeHandle on Sept 5, 2021 10:25:14 GMT -5
Alpha Wolf 9x18 Makarov conversion barrel in a Glock 42 (380). Loading a Berry 95 grain round nose plated bullet in Starline brass. Using Lee dies with the factory crimp die. Gun isn't running 100% every time. Played with the gun and load a bit and found that it isn't the load. Runs the same with factory ammo. Think I'll get the Dremel tool and some felt bobs out next and do a little polishing of magazine feed lips and barrel ramp..
|
|
|
|
Post by flyingzebra on Sept 5, 2021 11:27:37 GMT -5
With the new ban on importing Russian ammunition, the market enthusiasm for this conversion will surely fade.
|
|
|
|
Post by AxeHandle on Sept 5, 2021 13:40:58 GMT -5
Starline brass and Berry bullets.... A set of dies and a conversion for my Dillon 550... I'm ready to go.
|
|
|
|
Post by lar4570 on Sept 5, 2021 21:12:10 GMT -5
I think you are on the right track with looking at the feed lips of the magazine. The two cartridges are very close, but the 9x18 is a little fatter. You might have to thin or adjust the feed lips.
Maybe look and see where it's hanging up, right or left, top or bottom, then adjust to correctly steer the round home.
|
|
|
|
Post by AxeHandle on Sept 6, 2021 20:53:20 GMT -5
Almost got to the range to shoot today. Ended up lubricating the target carrier system instead. Shooting hopes tomorrow...
|
|
|
|
Post by AxeHandle on Sept 6, 2021 20:54:35 GMT -5
|
|
|
|
Post by AxeHandle on Sept 6, 2021 20:55:13 GMT -5
|
|
|
|
Post by AxeHandle on Sept 6, 2021 20:55:33 GMT -5
|
|
|
|
Post by AxeHandle on Sept 6, 2021 20:56:32 GMT -5
Real Glock guys are pretty negative about the made in the USA aspect of the G42  |
|
|
|
Post by magpouch on Oct 5, 2021 14:42:14 GMT -5
Any updates on this project axe? I love the MAK and have a Glock 42...
|
|
|
|
Post by AxeHandle on Nov 24, 2022 11:49:42 GMT -5
Thinking I'll pull this one back out to play with this winter...
|
|
|
|
Post by AxeHandle on Nov 24, 2022 11:50:57 GMT -5
|
|
|
|
Post by AxeHandle on Nov 24, 2022 11:51:28 GMT -5
|
|
|
|
Post by AxeHandle on Nov 24, 2022 11:52:06 GMT -5
|
|
|
|
Post by AxeHandle on Nov 24, 2022 11:52:20 GMT -5
|
|
