|
|
Post by foxtrapper on Mar 14, 2021 7:07:15 GMT -5
Was watching a restoration video of a 357 old model Blackhawk. Gun was found by magnet fishing and was pretty gunked up. On the video he shows a blister pack of a complete decommissioned om Blackhawk all parts included from barrel to grips. Barrel was fitted to a partial frame. Went to their website and they offer a lot of different makes and models. Interesting!
|
|
|
|
Post by needsmostuff on Mar 14, 2021 10:32:43 GMT -5
I get excited there till I figure out , it only makes sense if you NEED every gun part.
The packages of parts are often more expensive than the gun I am working on is worth.
And way too much if you only need a single part or two .
|
|
|
|
Post by bigbrowndog on Mar 14, 2021 11:01:10 GMT -5
Needmo is correct, although I was able take a Remington 742 receiver and convert it to a 760 by purchasing on of their demilled old 760’s. The project turned out great and I have a complete working gun for less than 250.00.
Trapr
|
|
|
|
Post by x101airborne on Mar 14, 2021 11:11:26 GMT -5
I need a hammer for a High Standard 22. They have a kit, but at 139 dollars; I only paid 50 bucks for the working weapon. Still on the hunt!
|
|
|
|
Post by matt56 on Mar 14, 2021 20:07:44 GMT -5
I converted this 4 inch model 10-8 round butt into a 3 inch 357 from a parts kit from everygunpart.com. The kit was from a 13-3 probably from around the same time period and the bluing matched well.   I also bought another model 13 kit to convert another 10 at a later date. They regularly have sales that make the prices much easier to swallow |
|
|
|
Post by thunderhorse on Mar 15, 2021 17:51:24 GMT -5
I haven bought quite a few "kits` from them for some of my Frankengun projects. I don't mind having a few extra parts left from builds because they usually get used one way or another.
|
|
|
|
Post by x101airborne on Mar 15, 2021 21:59:18 GMT -5
Matt56... LOVE that conversion!
Have you put many rounds through it?
|
|
cable
.327 Meteor
Posts: 686
|
Post by cable on Mar 16, 2021 12:23:18 GMT -5
I need a hammer for a High Standard 22. They have a kit, but at 139 dollars; I only paid 50 bucks for the working weapon. Still on the hunt! depending on the model, there are some hammers on ebay right now |
|
|
|
Post by x101airborne on Mar 16, 2021 17:15:24 GMT -5
Thanks!
|
|
|
|
Post by matt56 on Mar 16, 2021 18:31:14 GMT -5
Matt56... LOVE that conversion! Have you put many rounds through it? Not many, maybe 50 midrange loads just to see if it shot okay and didn’t develop any issues. All is good with it so far |
|
jeffh
.375 Atomic
Posts: 1,743
|
Post by jeffh on Mar 20, 2021 9:54:18 GMT -5
Matt56... LOVE that conversion! Have you put many rounds through it? Not many, maybe 50 midrange loads just to see if it shot okay and didn’t develop any issues. All is good with it so far I agree with x101airborne - lovely, lovely gun.
If I only had time to grab ONE on my way out' th' house - THAT would be the ONE!
|
|
