|
|
Post by bushog on Mar 7, 2021 11:17:09 GMT -5
For once I followed my own advice and found a couple good threads n this subject.
I need to know if the Burris DW rib mount and the Leupold rib clamp rings will fit my small frame .32 DW?
Any other helpful info would be appreciated...
If anybody has something for sale I'd be interested.
Thanks
|
|
|
|
Post by jfs on Mar 7, 2021 15:20:42 GMT -5
Let me see what I have.....
|
|
|
|
Post by jfs on Mar 7, 2021 15:40:16 GMT -5
I just tried a Burris 3 clamp scope base on my 6" DW 32 mag and its too long to fit unless you have a 8" barrel shroud. I even removed the front sight but still to long. Lets see what else I may have...
|
|
|
|
Post by bushog on Mar 7, 2021 18:27:32 GMT -5
That's good to know.
Sent PM
|
|
|
|
Post by needsmostuff on Mar 7, 2021 23:45:28 GMT -5
In the small frames a shroud is a shroud.
Save your seldom seen 32 marked shroud and get a run of the mill common as dirt 357 shroud in the configuration of your choice . Then get it drilled and taped for the mount/rings of your choice.
Let me know if you strike out finding a shroud ,,,,, I owe a pay it forward .
|
|
|
|
Post by bushog on Mar 7, 2021 23:50:11 GMT -5
In the small frames a shroud is a shroud. Save your seldom seen 32 marked shroud and get a run of the mill common as dirt 357 shroud in the configuration of your choice . Then get it drilled and taped for the mount/rings of your choice. Let me know if you strike out finding a shroud ,,,,, I owe a pay it forward . Ya' know...that's not a bad idea at all! |
|
|
|
Post by magnumwheelman on Mar 8, 2021 14:07:14 GMT -5
My 357 Max is drilled & tapped, & my 44 mag had the clamp on mounts... I agree with NMS
|
|
