|
|
Post by Mark Terry on Jan 27, 2010 11:01:36 GMT -5
I'm working on a NMSBH 44 Magnum conversion to a Bisley gripframe. I fitted the gripframe, and installed the hammer and trigger. Everything went back together pretty well except that the cylinder latch doesn't seem to drop far enough to allow the cylinder to rotate when cocking the gun. When the loading gate is open, the latch drops and the cylinder rotates freely.
What have I missed?
|
|
rigby
.327 Meteor
Posts: 769
|
Post by rigby on Jan 27, 2010 21:14:11 GMT -5
Sounds like the spring for the cylinder bolt (latch). The pin that sticks out of the bolt stop might not be contacting the spring properly?
|
|
|
|
Post by Mark Terry on Jan 27, 2010 23:10:31 GMT -5
Good guess but it turns out it was a miniscule difference in the hammer plunger length. Like to frustrated me though...  Thanks for the input. Mark |
|
rigby
.327 Meteor
Posts: 769
|
Post by rigby on Jan 28, 2010 5:40:43 GMT -5
Looks good, really like that front sight.
|
|
|
|
Post by Mark Terry on Jan 28, 2010 8:26:16 GMT -5
Thanks. That's a Stroh front sight. Rather pleased with the way it turned out. Note the roll printing was also removed from the barrel while I was at it. A little more cleaning up and hopefully get to shoot a little this weekend.
|
|
