|
Post by 2 Dogs on Jun 10, 2019 18:20:56 GMT -5
This is group buy for a 9mm bullet that should be a winner. This one should be pretty versatile since it will drop at .359", have the GC option, come with a large HP and a penta HP as well as a solid pin, in 2 and 4 cavity brass blocks and in the plain base should be available in the 6 cavity brass and 8 cavity aluminum molds for the PC crowd. As usual we need you to tell us which type/cavity mold you would like and your disguised email address in this format please: bigtimeshooter AT nomail DOT com Be patient and prepared to wait, Prices will be set by Miha when he is ready. 2 Cavity plain base 01. jtaffin AT outdrs DOT net....1 mold 4 Cavity plain base 01. Badwolf.db at gmail dot com....1 mold 4 Cavity Gas Check 01. bevancraigelliott AT gmail DOT com....1 mold 02. x101airborne at yahoo dot com.....1 mold 6 cavity plain base 01. Diamondean at hotmail dot com.....1 mold
|
|
|
Post by DiamondD on Jun 10, 2019 21:33:37 GMT -5
I’d like a 6 cavity PB brass mold please. Diamondean at hotmail dot com.
|
|
|
Post by 2 Dogs on Jul 6, 2019 9:08:45 GMT -5
I don't know why this one isn't doing better. I am excited about this mold for a number of reasons. The GC will let me run this bullet out of my 10" 358 GNR probably close to 1900 fps which will spell catastrophe for whatever it lands on. My Contender .357 Maximum should be in that same velocity range. Have you seen the crazy low AR prices on Palmetto State Armory? If not don't look because you will get hooked. I built myself a way keen 9mm AR Pistol that uses the Colt mags and with my suppressor I can probably shoot it indoors and not find myself and my wife bleeding out of my ears and nose from the concussion a 5.56 or 300 BO might put out. I have also always wanted a Single Six in 38 Super. This would be the optimum cast performer for that package IMO. Just lots of reasons I am excited about it. If you can think of a good one list it so we can get the guys off the fence and on the list!
|
|
|
Post by DiamondD on Jul 21, 2019 3:13:28 GMT -5
Yep 2 Dogs I have several plans for this one. Like you, I have a neat little AR 9 with a 6" barrel that this should be great for. Also I have a Dan Wesson Guardian in .38 Super that I would really like to try it in. I haven't loaded much 9mm but have more pistols in that caliber than any other and this would be a good fit for most. I'm willing to wait but it sure is looking like it will take a while with just the two of us wanting one?
BTW, a .38 Super Single Six sounds like a great gun, may have to think on that one.
|
|
|
Post by x101airborne on Jan 3, 2020 9:08:21 GMT -5
Also probably a light weight option for the 350 legend. 4 cavity gas check aluminum all hp options. x101airborne at yahoo dot com.
|
|
|
Post by 2 Dogs on Jan 5, 2020 11:13:46 GMT -5
I am not ignoring you guys. This one has been a bit of a non starter for some reason. We need quite a few more guys to sign up.
|
|
|
Post by taffin on Jan 11, 2020 20:38:57 GMT -5
ONE 2C HP jtaffin@outdrs.net
|
|
|
Post by bagdadjoe on Apr 21, 2020 17:44:12 GMT -5
CANCEL.
4 cavity brass hp, plain base, all pins joe in frankfort at g mail dot com
Scratch me off this one. Sold both my carbine ammo eaters.
|
|
|
Post by bcelliott on Apr 21, 2020 23:09:21 GMT -5
Do you have the nose length on this bullet? I run 9x23 Winchester, and I am limited to about 1.28" COL in my magazines. Brass is 0.889"
|
|
|
Post by boolitdesigner on Apr 23, 2020 8:07:41 GMT -5
Do you have the nose length on this bullet? I run 9x23 Winchester, and I am limited to about 1.28" COL in my magazines. Brass is 0.889" Maximum seating depth with the front of the front band at the case mouth is 0.348" with an O.A.L. of 1.237". You have plenty of room.
|
|
|
Post by bcelliott on Apr 23, 2020 12:24:08 GMT -5
Do you have the nose length on this bullet? I run 9x23 Winchester, and I am limited to about 1.28" COL in my magazines. Brass is 0.889" Maximum seating depth with the front of the front band at the case mouth is 0.348" with an O.A.L. of 1.237". You have plenty of room. Thanks!
|
|
|
Post by bcelliott on Apr 23, 2020 12:46:28 GMT -5
4 cavity brass GC all pins, please.
bevancraigelliott AT gmail DOT com
|
|
|
Post by 2 Dogs on Apr 26, 2020 13:58:31 GMT -5
Well, we are up to SIX!
|
|
|
Post by badwolf on Jul 8, 2020 5:27:51 GMT -5
2 cavity brass plain base, all pins Badwolf.db at gmail dot com
|
|
|
Post by badwolf on Dec 4, 2020 4:56:27 GMT -5
4 cavity brass plain base, all pins Badwolf.db at gmail dot com
|
|