|
|
Post by rleprechaun on Jun 3, 2019 7:21:48 GMT -5
Beautiful gun Huey! Alcorn
|
|
|
|
Post by Encore64 on Jun 3, 2019 7:44:04 GMT -5
Beautiful gun Huey! Alcorn Thanks Alcorn. That was a good grab on the 300 GNR. Great round and you could add a 321 GNR cylinder. |
|
|
|
Post by rleprechaun on Jun 5, 2019 6:01:12 GMT -5
Good idea!
|
|
cubrock
.401 Bobcat
TLA fanatic and all around nice guy....
Posts: 2,875
|
Post by cubrock on Jun 5, 2019 16:57:53 GMT -5
That is a great looking gun. Please report back if you have any issues with the b/c gap being that tight. One of my TLAs is that tight (.44 Mag) and it starts binding after shooting with certain powders. I have to take the cylinder out and clean the cylinder face and breech face of the barrel to continue shooting.
|
|
|
|
Post by Encore64 on Jun 5, 2019 18:05:37 GMT -5
Will do...
Shot it a good bit with Unique behind the Matt's WC Bullets. No problem with that session. But as you say, a powder that doesn't burn clean would be an issue.
Still, I prefer the tight tolerance guns. It's like those who are against shooting 45 Colts in 454 Casull guns. I wonder who is or is not cleaning these things...
|
|
cubrock
.401 Bobcat
TLA fanatic and all around nice guy....
Posts: 2,875
|
Post by cubrock on Jun 5, 2019 20:36:38 GMT -5
Will do... Shot it a good bit with Unique behind the Matt's WC Bullets. No problem with that session. But as you say, a powder that doesn't burn clean would be an issue. Still, I prefer the tight tolerance guns. It's like those who are against shooting 45 Colts in 454 Casull guns. I wonder who is or is not cleaning these things... I agree. I like tight tolerance guns, too, though I don't mind stock guns with looser tolerances. My issue with that TLA is that it will start binding after only a couple cylinders full. That isn't enough shots between cleaning for any serious using, at least in my world. |
|
|
|
Post by Encore64 on Jun 5, 2019 20:47:24 GMT -5
I'm going to try Longshot behind GT HP Bullets as a standard load in this gun. It's burning clean for me and matching 2400 velocity.
This gun is extremely accurate. Have the correct rear sight blade due in Friday. The saga continues...
|
|
