|
|
Post by AxeHandle on Dec 9, 2009 9:58:15 GMT -5
Took a few pics this AM.... These are the Leadheads 250 SWC 41 cal and the 41 cal 265 grain CP Bullets 41 that Glenn gave me flanked on each side by the 265 grain LBT LFN that I cast here in the vortex.. The nose on all three of these is .40.... FWIW my discussion with John Gallager, and Veral Smith's sale, drove me to the 265. When I finally find that deal on a 41 mag FA 83 I might buy a mold for a heavier one... No lube in the ones I made yet...... Planning to get all of that hard lube out and replace it with LBT blue first. Thought the meplat boys would like the head on shot.   |
|
|
|
Post by Lee Martin on Dec 15, 2009 9:20:06 GMT -5
Nice looking slugs Axe. Just curious....have you got your 1.40" 41 back yet? Mine should be ready for the range this weekend. I'll let you guys know how it shoots. -Lee www.singleactions.com |
|
|
|
Post by zeus on Dec 15, 2009 9:23:16 GMT -5
Hey Stan, I looked and that slug I sent was wide long nose......
|
|
|
|
Post by AxeHandle on Dec 15, 2009 11:47:56 GMT -5
No 1.4 41 here yet.....  |
|
Aggie01
.375 Atomic
max
Posts: 1,779
|
Post by Aggie01 on Dec 15, 2009 13:43:42 GMT -5
Nice looking slugs Axe. Just curious....have you got your 1.40" 41 back yet? Mine should be ready for the range this weekend. I'll let you guys know how it shoots. No 1.4 41 here yet..... The cylinder on mine is cut to length & has .41 dia holes all the way through it now. 1.876 OAL allowed according to Alan. That trip it'll take to Mahovsky's is gonna lag me up though... Might as well wait for you guys to work up some favorite loads, huh? |
|
|
|
Post by sixshooter on Dec 15, 2009 13:52:24 GMT -5
The 1.4 inch is based on the old supermag shell, right?
|
|
|
|
Post by AxeHandle on Dec 15, 2009 14:57:26 GMT -5
Yup, we are cutting the 1.6 414 SM case to 1.4... Using a 357 maximum cylinder trimmed to the maximum length for a Blackhawk... I hear that Alan has load data....  |
|
groo
.327 Meteor
I yet live!!!!
Posts: 855
|
Post by groo on Dec 27, 2009 14:48:33 GMT -5
Groo here
I would suggest the old SSK bullet.
Mine is #225b .411 -275 pb you can get the mold from nei..
Look under .411-300gc.
All my SSK bullets shoot great and drive deep[ask about nose to crimp length to fit your gun]
|
|
