|
Post by 2 Dogs on Mar 22, 2019 12:30:51 GMT -5
I am making a run of Bearcat dovetail fronts. These pretty much are halfway sold before I could even get the word out. I will also take preorders for Single Six and Vaquero dovetail fronts which will of course be scaled up versions of these. Contact me for details. Here is the first one I roughed out to see what it was going to take to make these. I found out right away why nobody offers these. They truly are small and have to be cut very carefully. Next I am working on how to best blank them out and a procedure to best cut them. I can take the blade to .100" if you like. Proportion proportion proportion. To scale with a Bearcat barrel. To scale with one of my Bearcat front sights. Working on uniformity. This is a little vise in the vise on my mill table. That's a roughing cutter. The finish cutter gets even closer.
|
|
|
Post by ncrobb on Mar 22, 2019 13:54:15 GMT -5
I’ll take a Bearcat and one for an old model Vaquero in 45 Colt when you get them going.
|
|
|
Post by Encore64 on Mar 22, 2019 13:57:31 GMT -5
These are products we really need. I've lost track of how many Ferminator Sights I've used.
My BFRs, Single 6,7,9s, and Bearcats are all better today because of efforts like this one.
|
|
|
Post by squawberryman on Mar 22, 2019 18:25:38 GMT -5
Good thing you don't work anymore...
|
|
|
Post by clintsfolly on Mar 22, 2019 19:10:38 GMT -5
Careful he may go back to work for the rest and breaks
|
|
|
Post by AxeHandle on Apr 10, 2019 17:47:27 GMT -5
I'm getting one for my new Birdshead 327!
|
|
|
Post by xtratoy on Apr 10, 2019 18:44:23 GMT -5
What do you suppose the cost is to get the barrel dovetailed to fit the sight? If I were to approach a local machinist about this project, what are the dovetail specs so he could figure out if he had the correct tooling already or it may be an added cost. My Bearcat has the standard straight blade.
|
|
|
Post by 2 Dogs on Apr 11, 2019 11:49:46 GMT -5
John Powers quoted 50 bucks to cut the dovetail but I’m not sure if that covers any additional work like reblue or other finish work.
As to your local guy, I should be able to cut it however he likes.
My dovetail cutter is a 60 degree angle.
|
|
|
Post by foxtrapper on Apr 11, 2019 17:32:41 GMT -5
Dogs put me on the list for a bearcat sight please!
|
|
|
Post by 2 Dogs on Apr 11, 2019 19:34:38 GMT -5
Dogs put me on the list for a bearcat sight please! Foxtrapper, I don’t have your information in my phone. Can you please PM your name address and number Sir? I’ll get back with you with my info and keep you posted.
|
|
|
Post by foxtrapper on Apr 12, 2019 15:51:18 GMT -5
Pm sent
|
|