|
|
Post by foxtrapper on Dec 10, 2017 7:18:55 GMT -5
Anybody? I do load for the 41 mag and have read you need to grind down the seater crimp die for the special . Or is there a easier way?
|
|
|
|
Post by bushog on Dec 10, 2017 8:55:18 GMT -5
Don't I have a lee crimp die?
Been a while..
|
|
|
|
Post by mart on Dec 10, 2017 11:13:31 GMT -5
I’ll dig out some 41 Special brass I made 20 + years ago and try my Hornady dies. I seem to remember they crimped 41 Special just fine. I’ll check this afternoon after church.
|
|
|
|
Post by Encore64 on Dec 10, 2017 11:15:00 GMT -5
My dies are Lyman 41 Mag/41 AE and crimp Special just fine.
|
|
rkrcpa
.30 Stingray
Posts: 263
|
Post by rkrcpa on Dec 10, 2017 11:17:51 GMT -5
I use an extra expander die and seating die that has been trimmed to allow for the shorter length of the special. I believe Redding makes a 41 spl Profile Crimp Die now.
|
|
|
|
Post by mart on Dec 10, 2017 18:20:43 GMT -5
Hornady dies will crimp either 41 magnum or special.
|
|
|
|
Post by glynn410 on Dec 11, 2017 17:57:50 GMT -5
My RCBS will not crimp-- but my Lee will-- it does bump the shoulder on a Keith bullet-- I shoot a 5 shot gun- a Tarsus 4" .41 magnum
|
|
|
|
Post by foxtrapper on Dec 11, 2017 20:00:39 GMT -5
I have hornady 41 mag dies so it sounds like I’m all set! Thanks gents!
|
|
