|
Post by potatojudge on Feb 20, 2017 0:21:57 GMT -5
|
|
|
Post by bushog on Feb 20, 2017 0:27:09 GMT -5
NOOOO!
That is NOT a Cockeyed hammer on that gun and I think it's a Micro sight.
Certainly not a King front.
Now....if you want it that's OK but not a King conversion.
Did you buy that King gun you have from me?
|
|
|
Post by potatojudge on Feb 20, 2017 0:56:10 GMT -5
I agree it looks like a micro sight.
On closer inspection the hammer looks like it was bent to the left? Hard to tell. I missed the first time around it's been converted to SAO.
My interest was in the possible King work, not that the price is bad for a nice DA 22 especially compared to what S&Ws bring now.
No, mine is a gun show find from years ago that needed a bit of work. I can do Colt timing just fine, so it was just a matter of tweaking a few things to get it operational. Great gun in SA, but the bolt bounces out of the cylinder notch on DA and allows the cylinder to over rotate. Already replaced the bolt spring (tiny little coil spring that pushes the bolt up) with a Numerich part. Likely needs some combination of a new or repaired bolt, recut cylinder notches, or a new cylinder. The cylinder has classic signs of being used out of time. I really should look into a stronger bolt spring and see if that fixes it, but it'd just be a work around. The short action is phenomenal, the SA trigger better than anything else I own, and the sights are great. Worst case I guess I could make it SAO and a dedicated target gun for safety's sake.
|
|