|
|
Post by bulasteve on Jan 14, 2017 8:45:56 GMT -5
I've not heard any friends nor anyone here mention their products. With the choke threading and spate of rough bores mentioned on this forum lately, wondering if any here have used the bore polishing kit they sell ?
|
|
|
|
Post by bulasteve on Jan 14, 2017 12:41:58 GMT -5
I raid/view magazine racks at various stores. If I see an article or three that catches my attention, I buy it. This the reason why there are a dozen or two Handloader Magazines laying around here. Worthy to note, they are still laying around here. All have had Puff-Lon adds in them. I've often thought that EVERY magazine should have a regular column that tests and reports on the items they want us to buy. So, has there ever been a test report on Puff-Lon, for instance ? During a recent write up on the M329 there was a side bar write up on Rim Rock Bullets. Puff-Lon products could get a similar treatment. Your thoughts ?
|
|
|
|
Post by bulasteve on Jan 15, 2017 17:39:52 GMT -5
That bad, huh ?
|
|
|
|
Post by pbcaster45 on Jan 19, 2017 9:29:31 GMT -5
I've used Ballistics Products Original Shot Buffer in some of my rifles and revolvers but nothing from Puff-Lon. And I've only used LBT Bore Lap to polish my barrels - Sorry!
|
|
|
|
Post by bulasteve on Jan 19, 2017 13:26:26 GMT -5
It sounded like an easier options than the others. Just use their product to fill the empty cartridge space 'tween powder and bullet and go ! Guess they need a BIGGER ad and someone to write an article. Or..just don't work. Bleep.
|
|
|
|
Post by cas on Jan 19, 2017 23:43:26 GMT -5
I didn't know Puff-Lon made anything but Puff-Lon!  . (Which I've used a fair amount of) |
|
|
|
Post by ddixie884 on Jan 21, 2017 2:04:33 GMT -5
I did read a test on Puf-Lon, several years ago. It was in a major gun mag and the writer was someone I respected. I just remember that I thought if I needed it, I would try it. Sorry, my memory is not what it was 50 or 60 years ago...
|
|
|
|
Post by bulasteve on Jan 21, 2017 8:48:37 GMT -5
Thank you. The impression stuck, that's about all I'd remember too !
|
|
|
|
Post by bulasteve on Jan 21, 2017 9:20:06 GMT -5
With the amount of empty 44spec and 44mag brass piling up lately, I need to decide and get an order in quickly here.
|
|
. (Which I've used a fair amount of)