|
Post by paul105 on Dec 5, 2016 10:08:41 GMT -5
Anyone have any first or second hand experience with this brand? Good, bad or indifferent?
Thanks,
Paul
|
|
|
Post by zeus on Dec 5, 2016 11:55:18 GMT -5
I use the 408 Cheytac brass from Bertram to form to my 375 SnipeTac. Seems to be fine for what it is. What caliber are you looking for?
|
|
|
Post by paul105 on Dec 5, 2016 12:38:00 GMT -5
Thanks Glenn.
7mm STW -- I've found a source that is about half the cost of Nosler brass. Can't find anything other than Nosler & Betram for sale online.
I won't buy the cheaper brass if it's not reasonably equivalent to that offered by Nosler.
Paul
|
|
|
Post by zeus on Dec 5, 2016 13:32:02 GMT -5
I haven't had any issues with it to speak of.
|
|
|
Post by magnumwheelman on Dec 5, 2016 16:47:57 GMT -5
I've only used it on low pressure "obsolete" cartridges... for which it seemed fine... 7mm STW is not a low pressure round however... I'd likely stick with Nosler for that particular cartridge, myself
|
|
|
Post by mart on Dec 5, 2016 17:29:09 GMT -5
My experience has not been good with it. I have some 222 Rimmed that wants to split the necks despite only having been loaded once or twice.
|
|