|
Post by 2 Dogs on Sept 30, 2016 12:36:46 GMT -5
I need to cast some cowboy bullets in quantity. I am looking for a .454" diameter 45 Colt Cowboy style bullet. Needs to be something like what is in the attached photo but not exactly. I have looked at midway, Lee, and NOE as well as Miha's mold list. I can find Keith bullets all day long, but why can't I find a 4-6 cavity cowboy style bullet? I could take a shot and buy the Lee 6 cavity but since they have a plus or minus .003" tolerance I would probably get one on the small size. Anybody got one they would sell me?
|
|
edk
.375 Atomic
Posts: 1,108
|
Post by edk on Sept 30, 2016 12:57:52 GMT -5
How about the RCBS 2-Cavity Cowboy Bullet Mold 45-230-CM 45 Caliber 230 Grain Flat Nose? Better yet there is a MP mold variant that was done by your favorite bullet designer
|
|
|
Post by dougader on Sept 30, 2016 13:01:33 GMT -5
A caster that sells here (?) and on the Ruger forum sold me a mold like that some time back. Let me see if I can find it.
|
|
|
Post by 2 Dogs on Sept 30, 2016 13:08:34 GMT -5
Needs to be 4-6 cavity and drop a .454+ Bullet at 250-255 grains.
|
|
okie44
.30 Stingray
Posts: 177
|
Post by okie44 on Sept 30, 2016 13:12:06 GMT -5
|
|
|
Post by dougader on Sept 30, 2016 13:13:03 GMT -5
Ah, mine is a 2 cavity mold at .452 Wish I could have been of some service for you, Fermin.
|
|
|
Post by 2 Dogs on Sept 30, 2016 13:26:52 GMT -5
Ah, mine is a 2 cavity mold at .452 Wish I could have been of some service for you, Fermin. Please measure a bullet Doug. Might be bigger than you think!
|
|
|
Post by boolitdesigner on Sept 30, 2016 14:36:15 GMT -5
Needs to be 4-6 cavity and drop a .454+ Bullet at 250-255 grains. MP 454640............ made in 4 cavity.
|
|
Snyd
.375 Atomic
The Last Frontier
Posts: 2,388
|
Post by Snyd on Sept 30, 2016 15:54:25 GMT -5
I need to cast some cowboy bullets in quantity. I am looking for a .454" diameter 45 Colt Cowboy style bullet. Needs to be something like what is in the attached photo but not exactly. I have looked at midway, Lee, and NOE as well as Miha's mold list. I can find Keith bullets all day long, but why can't I find a 4-6 cavity cowboy style bullet? I could take a shot and buy the Lee 6 cavity but since they have a plus or minus .003" tolerance I would probably get one on the small size. Anybody got one they would sell me? 454-255-RF RG4 Cavity PB (45 Colt) noebulletmolds.com/NV/product_info.php?cPath=41_161&products_id=755
|
|
JSilva
.30 Stingray
Posts: 184
|
Post by JSilva on Sept 30, 2016 16:18:15 GMT -5
|
|
jdoc
.327 Meteor
Posts: 727
|
Post by jdoc on Sept 30, 2016 16:46:08 GMT -5
You need an old Lyman four cavity mold for the 454190 and I don't have one. Good luck
|
|
jdoc
.327 Meteor
Posts: 727
|
Post by jdoc on Sept 30, 2016 16:47:11 GMT -5
You need an old Lyman four cavity mold for the 454190 and I don't have one. Good luck
|
|
|
Post by 2 Dogs on Sept 30, 2016 18:07:00 GMT -5
You need an old Lyman four cavity mold for the 454190 and I don't have one. Good luck All I see are 2 cavity versions. It's always something.
|
|
|
Post by boatswainsmate on Sept 30, 2016 18:35:56 GMT -5
Would these fit the bill? This is Miha's 454-225.
|
|
jdoc
.327 Meteor
Posts: 727
|
Post by jdoc on Sept 30, 2016 19:00:53 GMT -5
Contact Lyman directly. A good friend of mine once obtained a long discontinued mold from the factory by doing so. The current Lyman 452190 would probably cast undersize. You will want the 4554190 mold.
|
|